Subsea Rigid pipes, Lay Design Pipe in Pipe Online Course

Rigid pipelines are a fundamental component of subsea architecture, forming the subsea highway that transport oilfield fluids between the wellhead to the processing facility. Rigid pipelines are made from carbon steel, corrosion resistant alloys or hybrid construction with a carbon steel parent pipe and internal corrosion resistant cladding or lining.Show more

Rigid pipelines range from small diameter 4-inch pipes for oilfield service fluids, to 18-inch infield lines, to larger diameter export trunk lines connecting offshore processing facilities to onshore receiving facilities.

The increasing amount of High-Pressure High Temperature (HP/HT) reservoir, challenge oil and gas industry practitioner to maintain the flowlines temperature. One method to tackle this problem is adding thermal insulation layer to pipeline. Furthermore, engineer found a good method to apply thermal insulation to the pipeline called Pipe in Pipe.

As it’s named, Pipe in Pipe (PIP) basically consist of rigid inner pipe and rigid outer pipe (also known as carrier pipe). Inner pipe is the main pipe that located inside the outer pipe and the function of this pipe is as hydrocarbon exposed media to transfer it. On the other hand, outer pipe is the part of the PIP system that exposed to environment.

Consequently, this part need corrosion coating or sacrificial anode to prevent itself from corrosion threat.
Between outer pipe and inner pipe usually insulation material is applied. Beside insulation layer, there is also air gap between these two pipe acts as additional thermal insulation and consider as dry insulation, which better than wet insulation.

For full videos you can visit this link :

https://drive.google.com/file/d/1g3a6_2clfjUZV3G89D5Nt0y7E5tgVPZt/view?usp=sharing

https://bit.ly/3Gd9ClI

and you will be directed to a google drive link where you can download all files of this course

https://drive.google.com/file/d/18gVEskW8ucfAEYWE35iWwr_2Q9Fy9F8N/view?usp=drive_link