1 month ago

JJC TP-S1 Sony Camera Shooting Grip Review
https://youtu.be/fSdl6qPIBDM

More Info and Purchase: https://tinyurl.com/yudr9p7q

Buy Me A Coffee: https://www.buymeacoffee.com/marcoscu6

Blog:

Having just bought a Sony ZV-E10 camera, I was tempted by the official Sony GP-VPT2BT but changed my mind when I saw the £144 price tag. I looked around for alternatives and there were several but this one was the cheapest but for just £44 could it be any good?

This handgrip works with the following cameras: Sony ZV-1, ZV-1 II, ZV-E1, ZV-E10, ZV-1F, a6100 a6400 a6600 a6700, a1, a7 III, a7 IV, a7C, A7C II, A7C R, a7S III, a7R III, a7R IV, a7R V, a7R4A, a7R3A, a9, a9 II, a9 III, FX3, FX30, DSC-RX0 II, DSC-RX100 VII.

The packaging and presentation are rather low end and in the box, you receive the Grip, CR202 battery, wrist strap, and a user guide. The box and Amazon listing says the device is the TP-S1 but for some reason, the user guide calls it the BTR-S1. The build quality is OK but lacks the premium feel of a high end device, but that is perhaps to be expected for the price.

The 46 x 193 x 40 mm grip attaches to the tripod mount on the underside of the camera with a thumbwheel giving a secure tight fit. The grip opens up to form a non-extendable mini tripod with a detachable Bluetooth LE remote control built into one leg.

The tripod is stable enough with the ZV-E10 kit lens fitted but less so when a longer or heavier lens is installed. Press the large button on the hinge below the thumbwheel to allow the camera to tilt 180° front or back. Press the rectangular button on the rear of the grip just above the tripod legs to rotate the head a full 360°. The head tilt and pan operation is smooth, slick and easy to use.

The remote control is powered by a CR2032 watch style battery which should last a good length of time although I would have rather had a rechargeable battery. The proper clicky buttons on the remote are well laid out and easy to find by touch or eye. On the front face are buttons for focus/zoom, with below a large button to start/stop video or stills image taking (lightly press to obtain focus, fully press to take an image). Below these are buttons mirroring the camera's Autofocus and C1 buttons, the function of both buttons can be defined in the camera settings. On the top left of the front face is a handy status LED. On one side of the remote is a lock/unlock switch to prevent accidental operation and on the other side turret switches to select movie/stills mode and zoom/focus operation. The selection made will determine the way the main and top two buttons operate.

I have to say it all works well enough. I have had no Bluetooth issues and all the buttons work reliably every time. I like the way that the remote control is detachable and the LED confirms the Bluetooth connection.

On the negative side, I have to say I do not like the cheap feel of this unit, although this does not affect the way it works. Some users have reported that the legs do not fully close to form the handpiece of the grip, but I have to say my one seems OK.

On balance, I am very happy with my purchase with the only drawbacks being the cheap feel and poor presentation of the product.

Music: YouTube Audio Library: Unicorn Heads: Town_of_24_Bars

Loading comments...