DIY Cedar Bucket Planter

1 month ago
6

I wanted to make a tiered bucket planter like I've been seeing all over, but I wanted to simplify the process and solve a fairly major issue I've been seeing. My planter is only two levels and there are only two buckets at each level. I don't like the three tier bucket planters or the long rows because it becomes difficult to reach each bucket. When the bucket is full of dirt, it's difficult to reach over and pull it out from the holder. It's also difficult to get close to the plants to check on the or pick food from them. I used 1x4s because I found them on sale. They were plenty strong enough so if you wanted to use 2x4s, that would be even stronger. I used 3.5" gallon Menards buckets but they are the same diameter of 5 gallon buckets so if you follow my dimensions you should be able to build a planter for 3.5 or 5 gallon buckets - assuming the buckets you use are the same dimensions as the Menards buckets. I would recommend checking the diameter using my method just to be sure.

🖥️ Website: https://www.fangerwoodworking.com/

🔨 Tool links (Amazon links are affiliate links which I may earn a commission from if items are purchased, however, they are not sponsored products):
Safety Gear
- Micro jig narrow rip push block: https://amzn.to/3Nl97ZF
- Micro jig paddle push block: https://amzn.to/43Ic9ON
- Milescraft push stick: https://amzn.to/3NDlDoW
- ISOTunes ear protection: https://amzn.to/44aYpMd
Measuring
- FastCap measuring tape: https://amzn.to/3qYM9Ao
- Setup blocks: https://amzn.to/3NFobCZ
Sanding
- Bosch sander: https://amzn.to/3qVilEE
Saws
- Bosch job site table saw: https://amzn.to/46t1nhl
- Bosch track saw: https://amzn.to/43RNS8T
Joining
- wen biscuit joiner: https://amzn.to/3CGt8Fm
Drilling
- Forstner Bit Set: https://amzn.to/3NGbMi8
Other
- auto vacuum switch: https://amzn.to/42SayEE
- 2P10 super glue and activator: https://amzn.to/3Pot7gU
- Bosch dust extractor: https://amzn.to/3PmF8Dk
- WEN air cleaner: https://amzn.to/3JoWj3B
- HDPE miter bars: https://amzn.to/3LvXDma
- Toggle clamps: https://amzn.to/3LteTbN

Loading comments...