Premium Only Content

HOW TO MAKE A MULTIFUNCTIONAL TABLE WITH ROTATING DRAWER - STEP BY STEP (1)
Creating a multifunctional table with a rotating drawer can be a fun and rewarding DIY project. Here's a step-by-step guide to get you started:
Step 1: Gather Materials and Tools
Materials:
Wooden board or panel for the tabletop
Wooden boards for the table legs and frame
Wooden dowels or metal rods for the rotating mechanism
Drawer slides
Screws
Wood glue
Drawer handle
Sandpaper
Stain or paint (optional)
Tools:
Saw (circular saw, jigsaw, or handsaw)
Drill and drill bits
Screwdriver
Measuring tape
Pencil
Wood clamps (optional)
Wood router (optional, for decorative edges)
Step 2: Design the Table
Decide on the dimensions and design of your table. Consider the size of the tabletop, the height and width of the legs, and the overall aesthetic you want to achieve. Sketch out your design on paper, including the placement of the rotating drawer.
Step 3: Cut the Wood
Using a saw, cut the wooden boards to the desired dimensions for the tabletop, legs, and frame according to your design. If you're adding decorative edges to the tabletop or legs, use a wood router to create them.
Step 4: Assemble the Frame
Assemble the frame of the table by attaching the legs to the tabletop using screws and wood glue. Use a square to ensure that the legs are positioned at right angles to the tabletop for stability.
Step 5: Install Drawer Slides
Attach drawer slides to the underside of the tabletop and inside the frame according to the size of your drawer. Make sure the slides are level and aligned properly to allow the drawer to slide smoothly.
Step 6: Construct the Drawer
Build the drawer using wooden boards cut to the appropriate size. Assemble the drawer box using wood glue and screws, then attach the drawer bottom. Install the drawer handle on the front of the drawer.
Step 7: Create the Rotating Mechanism
Cut wooden dowels or metal rods to the length of the drawer width. Drill holes in the drawer sides and frame to accommodate the dowels or rods, ensuring that they are evenly spaced and aligned. Insert the dowels or rods into the holes to create the rotating mechanism.
Step 8: Sand and Finish
Sand all surfaces of the table and drawer to smooth out any rough edges or imperfections. Apply stain or paint to the wood as desired, following the manufacturer's instructions. Allow the finish to dry completely before proceeding.
Step 9: Final Assembly
Attach the drawer to the drawer slides inside the frame of the table. Test the rotation of the drawer to ensure that it moves smoothly without obstruction. Make any necessary adjustments to the rotating mechanism or drawer slides.
That's the first part of the process! Let me know if you're ready for the next steps or if you need further details on any of these steps.
-
LIVE
RealAmericasVoice
3 days agoHOME OF REAL NEWS
9,112 watching -
LIVE
The HotSeat
1 hour agoThe Manhunt Is Underway! Time Is Running OUT!
1,543 watching -
LIVE
The Nunn Report - w/ Dan Nunn
1 hour ago[Ep 746] Remembering: Charlie Kirk, 9/11, Benghazi | Guests Dave Bray [USA] & Tim Cruickshank
225 watching -
22:31
Jasmin Laine
1 hour agoMSNBC Analyst FIRED in Disgrace Over Charlie Kirk Remarks—FBI Launches $100K Manhunt
8.45K22 -
LIVE
The Tom Renz Show
1 hour agoRIP Charlie Kirk - Updates On America’s Turning Point
310 watching -
31:05
Uncommon Sense In Current Times
1 hour agoCharlie Kirk Assassinated: Why Silence nor Anger is Not an Option
4.14K2 -
54:06
Ben Shapiro
2 hours agoEp. 2278 - UNTHINKABLE: Charlie Kirk, 31, Assassinated
61.1K85 -
2:49:18
Robert Gouveia
5 hours agoCharlie Kirk Latest News; FBI Briefing; Shooter Photo Captured; 9/11 Honors
77K17 -
48:51
Liz Wheeler
2 hours agoFor Charlie Kirk
51.5K22 -
2:52:05
Steven Crowder
7 hours agoFOR CHARLIE KIRK: Breaking Exclusive On Assassin
1.53M2.31K