How to Slice 3D Printing Models with Chromebook - Cloud 3D Print Online Slicer Tutorial

YES. You can 3D print with a Chromebook! SLICING is a critical step in the 3D printing process. A slicer is what we call the software that takes the model you want to print and "slices" it into layers and lets you modify the way your printer will print. Thanks to browser-based slicing software, it is very easy to do this on a Chromebook. Unfortunately, full desktop versions of slicing software (Cura, PrusaSlicer, Etc.) are not compatible with Chromebooks (unless you do some technical software modifications to your Chromebook which is probably too daunting for most people), so an online slicer is the only real option. Here I'll show you the quick version of the entire 3D printing process on a Chromebook.

Test model (calibration cube): https://www.printables.com/model/98877
Online Slicer: https://cloud3dprint.com/

🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at http://rcwithadam.com/

Want to support RCwithAdam? ↴
KO-FI: https://ko-fi.com/rcwithadam
OR
PATREON: https://www.patreon.com/RCwithAdam
Thanks!

-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
**DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!**
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam #3Dprinting #Chromebook