Bedini Electrostatic Self Running
In this video, we explore the potential of a Bedini motor to power an electrostatic capacitor charging circuit and create a self-looped energy system., it is known for its high efficiency and the ability to increase efficiency with small mechanical loads.
I propose using the Bedini motor to drive the spin of electrostatic plates, which can charge a set of Leyden jars to over 150kV within seconds. Instead By using an SCR and neon trigger to dump the charge of a capacitor into a 12V charging/run battery, we create a self-looped system that takes advantage of the extra electrostatic energy input.
I done the math to calculate the input and output power of this system, based on assumptions of a 100mA input current and a capacitance of 100uF, with a discharge frequency of 0.5Hz. Based on these values, we calculate an input power of 1.2 watts and an output power of 2.5 watts, indicating that the system could potentially produce more output power than input power.
I incorrectly calculated the energy stored in the capacitor as 5 joules, which was an order of magnitude too high. Me bad!!!! So let's do this again :)
If the energy stored in the capacitor is 0.5 J and it is released over a 2 second period, the average power output of the system would be:
P = E / t
P = 0.5 J / 2 s
P = 0.25 watts
So the power output would be 0.25 watts. Less then our input. So in order to get more in output we need to modify the system as follows:
To achieve an output power of 1.3 watts, assuming an input power of 1.2 watts, the power gain needs to be 1.08, which means the output power needs to be 1.08 times the input power.
Using the same formula as before:
P = 0.5 x C x V^2
We can rearrange it to solve for capacitance C:
C = (2P) / V^2
Where P is the desired output power (1.3 watts) and V is the voltage at which the capacitor will discharge (100 volts).
Plugging in these values:
C = (2 x 1.3) / (100)^2 = 0.0000026 Farads, or 2.6 microfarads
So a capacitance of 2.6 microfarads would be sufficient to achieve an output power of 1.3 watts with a voltage of 100 volts. With a cap dump of one second.
Same idea! Sorry about that. I might just delete this video in a little while and update with the corrected version. :)
Forum:
http://typeright.social/forum/
Please Help Support My Research: https://youtu.be/pYXETBB40j0
-
6:21
Joel Lagace
2 months ago $0.04 earnedHigh Power Crystal Cell
76 -
6:23:04
Drew Hernandez
20 hours agoWATCH PARTY: DNC ROAST DAY 2
135K129 -
4:31:28
Due Dissidence
14 hours agoLIVE: DNC PROTESTS, DAY 2 - Workers Strike Back Rally w/ Jill Stein, Kshama Sawant, Nick Cruse
99.9K44 -
1:37:17
Kim Iversen
12 hours agoAbortion Activists Go Wild at the DNC: Abortion Pills & Free Vasectomies on Display
95.5K131 -
26:31
Michael Franzese
11 hours agoJoe Rogan doesn't HOLD BACK in Netflix Special
77.1K46 -
1:36:32
Glenn Greenwald
12 hours agoIs Kamala Harris "Working Tirelessly" for a Cease-Fire in Gaza?; Jonathan Turley on Free Speech; Richard Medhurst on his UK Arrest | System Update #318
124K119 -
2:21:37
WeAreChange
12 hours agoWARNING: DNC To Be Designated Monkeypox Spreader Event??
107K24 -
LIVE
Right Side Broadcasting Network
3 days agoLIVE: President Trump Delivers Remarks on Crime and Safety in Howell, MI - 8/20/24
3,549 watching -
5:53:27
SNEAKO
17 hours agoIslam vs Christianity Debate: Muslim Lantern VS Andrew Wilson - Trinity and Age of Consent
225K635 -
1:13:29
Redacted News
15 hours agoTime's UP! PUTIN is PREPPING something big with Ukraine, RFK to drop out of race | Redacted News
189K351