PROA7 or PROA7PLUS: Configuring Apple HomeKit
In this video, Dylan from Alarm Grid will show you how to enable and pair a PROA7 or PROA7PLUS with Apple HomeKit. In order to work with Home Kit, the panel must have access to WIFI. This means that PROA7 and PROA7C panels must first have a PROWIFI or PROWIFIZW installed before they can support HomeKit.
00:00 - Introduction
00:46 - Enable HomeKit in Panel
01:58 - Reset HomeKit (Default)
02:44 - Pair with HomeKit
02:57 - Get Panel QR Code
04:22 - Using HomeKit (Arm/Disarm)
05:40 - Closing
To verify that the panel is on a firmware version that supports HomeKit, you can go to: Menu, scroll down to Tools, Enter Installer Code (4112 is default), Programming, Advanced Settings. Scroll down to the bottom of the page and ensure the "Enable HomeKit" line item is toggled on. Use the back arrow at the upper left of the screen to back out of programming. If you don't see the option to Enable HomeKit, you need to firmware update the panel. If you're not sure how to do that, contact your alarm dealer.
Next, we recommend that you reset HomeKit. Even if you haven't used it before with the panel. This will help to prevent possible issues moving forward. From the home screen, click the Menu icon, then scroll down to Settings, Apple HomeKit, then enter the Installer Code or Master Code (default is 1234). Tap "Reset HomeKit" then tap "Continue." Once the reset is complete, you'll remain on the Apple HomeKit screen of the panel.
Begin the pairing process on the iOS device you'll be using. From within the Home app, tap "+ Add Accessory". On the panel, tap "Pair Controller to HomeKit". The panel will produce a QR code. Scan this using the camera on your iOS device. Once the QR code has been scanned, the iOS device will walk you through adding the panel and each compatible zone (life-safety zones are not compatible with HomeKit and will not show up.) You can edit device names and choose appropriate icons for each device within HomeKit. Once you're finished, click "Done" on the iOS device. You're now ready to begin using your PROA7 or PROA7PLUS with HomeKit.
https://www.alarmgrid.com/faq/how-can-i-configure-apple-homekit-on-a-proa7plus-panel
-
16:18
Shane Whatley
3 years agoWhat is HomeKit? | The Basics of Building a Smart Home With Apple's HomeKit
39 -
11:39
Alarm Grid Home Security DIY Videos
5 years agoCreating an Automation in Apple HomeKit
31 -
5:38
SlimothyTV
21 days agoMinimalist iPhone 15 Pro Setup // What's On My iPhone 2024
5 -
14:26
Shane Whatley
1 year agoNEW Apple HOME APP First Look!! - iOS 16
4 -
12:43
Shane Whatley
2 years agoFinally!! HomeKit Widgets on your iPhone and iPad!
3 -
24:47
NathanLemoine
1 year agoMinimalist iPhone Setup! (How To Customize + Apps)
14 -
21:53
Shane Whatley
8 months agoApple Home 2.0: Rebuilding My Smart Home
6 -
8:08
Matt Gonzalez
10 months agoThe Ultimate HomeKit Setup - Aqara
7 -
9:15
Matt Gonzalez
2 years agoWhat's on my iPhone 13 Pro
11 -
4:00
Welcome to BE Canada – Your Virtual Gateway to Canada!
8 months agoIntroducing iPhone 15 Pro | Apple
9