Back At The Bench 101523 Converting 30-30 Brass to 360 Buckhammer

First, I remove about 1/4 inch from the 30-30 case neck. Then, I chamfer and deburr to clean up the case mouth. Next, I anneal the brass to soften up the case neck for easier sizing. After that, it's off to the press where I use a Lee neck sizing die for 35 Remington. Finally, I use the RCBS resizing die to uniform the case as 360 Buckhammer. A short tumble to get the lube off and cases are ready for loading and a trip to the range.

Here's a couple of links for the chop saw and brass holder.
# Mini Table Saw
https://www.amazon.com/Mini-Table-Saw-Adjustable-Polishing/dp/B0C7KPTWZV/ref=pd_rhf_d_dp_s_pop_multi_srecs_sabr_cn_sccl_1_3/134-2026334-1714938?pd_rd_w=xQZaj&content-id=amzn1.sym.3691afbf-8e16-459d-afed-a0e67e4d7158&pf_rd_p=3691afbf-8e16-459d-afed-a0e67e4d7158&pf_rd_r=9506VC687Y4XCFYEF1GS&pd_rd_wg=ffctf&pd_rd_r=ceab7e0e-137d-4fff-b364-e370962d97a4&pd_rd_i=B0C7KPTWZV&psc=1

# Perfect Adapter
https://gun-guides.com/products/Perfect-Adapter%E2%84%A2-360-Buckhammer-BHMR-p584026002