Springfield Armory 2020 Rimfire Project Part 1 DIY Adjustable Cheekrest

From start to finish: Part 1 of the XDMAN's Springfield Armory 2020 Rimfire Project Build. In this episode I will show you how to make an adjustable cheekrest. This how to, can be used for any bolt action rifle and can be made for around 10.00 or less in supplies and in one afternoon. Watch and see how easy it really is to customize your rifle.

Shopping List
1. A small sheet of kydex 8x10 inches or less
2. Two 1/4-20 Connector Bolt and Nut
3. Four 1inch washers to fit the bolt and nuts.

Contents of this video
0:00 - Intro
1:12 - What things you will need to complete the project
2:50 - Disassemble the stock
3:00 - Making a cheekrest template
6:19 - Test fitting the template
7:09 - Measure once, measure twice and then measure a third time for your holes
7:47 - Drill baby drill! AKA the point of no return
8:38 - Mock up your hardware and adjust
8:50 - Transfer your holes to the template
10:00 - Use your template to mark the Kydex, cut it out and clean it up
11:26 - Mold the Kydex on the stock
12:22 - We have a working mock up
12:40 - Final thoughts and testing it out

If the video was helpful, please share it and follow the channel well as our other social media
https://xdman.com
https://facebook.com/therealxdman
https://twitter.com/therealxdman
https://instagram.com/therealxdman