How to Disassemble and Reassemble the Arex Delta X

Workman Firearms

"Disassembly and Reassembly of the Arex Delta X" by Workman Firearms:

Disassembly:
1. **Clearing the Firearm:** Adam removes the magazine and racks the slide to the rear. He physically and visually inspects the chamber and mag well to ensure the firearm is clear.

2. **Slide Release:** Adam releases the slide, letting it slide forward.

3. **Hamburger Grip:** Using a grip similar to handling a Glock, Adam pulls the slide back while pushing down the takedown pins on either side.

4. **Trigger Pull:** After releasing the slide but keeping the pins down, Adam pulls the trigger. The slide moves slightly, allowing for its removal.

5. **Frame Set Aside:** The frame is set aside as it's broken down as much as needed.

6. **Recoil Spring:** Adam compresses the recoil spring and places it in a parts bin.

7. **Barrel Removal:** The barrel is pushed from the bottom and pulled up to remove it from the slide.

Reassembly:
1. **Barrel:** The flat side of the barrel faces down and is slid into the front of the upside-down slide.

2. **Recoil Spring:** The smaller circle inside the recoil spring faces the front of the firearm. Adam compresses the spring, and it sits on a notch in the barrel.

3. **Slide onto Frame:** Unlike Glocks, the slide doesn't slide off but is placed onto the frame and locked back, popping right back on.

4. **Function Check:** Adam racks the slide and performs a function check, ensuring the trigger resets properly.

The tutorial is clear, concise, and provides valuable information for anyone looking to understand the inner workings of the Arex Delta X or perform maintenance on their own firearm.

#workmanfirearms #arex #deltax

Legal Notice: All content on the Workman Firearms Training Group YouTube channel reflects our own opinions and should NOT be taken as legal advice. Please seek out the guidance of professionally trained and licensed individuals before making any decisions.

Disclaimer: These videos are strictly for educational and entertainment purposes only. All work on arms should be carried out by a licensed individual, and all state and federal rules apply to such work. We (including YouTube) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of our videos.

Disclaimer: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide, Workman Firearms may receive a small commission. There is no additional charge to you! Your support helps us continue our mission to empower individuals with the knowledge to protect themselves and their loved ones, and to maintain the quality of our training services. Thank you for supporting Workman Firearms and Range 42, and for being a part of our commitment to safety, individual rights, and responsible firearm ownership.

Recommended Gear:

https://amzn.to/3QN1Gy4 - Hearing Protection
https://amzn.to/45tSItm - Shooting Glasses

https://amzn.to/3sn5aNg - Glock tool
https://amzn.to/3QKZdEj - Glock Parts Tray
https://amzn.to/3seZbKt - Glock Mag Loader
https://amzn.to/3KLDoAu - Base plate tool