Premium Only Content

Antique Blowtorch Restoration - with testing!
SUBSCRIBE and check out my new Channel:
https://www.youtube.com/channel/UCM65z7cJmZUOpWUXVwHOc7g
Antique Swiss Blowtorch Restoration - with testing! Oerlikon Record
In this video, I'm restoring an antique Swiss blowtorch.
Like, comment, subscribe.
I found this old blowtorch, which was perfect for a nice restoration video. Before I started to disassemble I wanted to know if it still works and it did. The flame was quite inconsistent and fire leaked everywhere. By the first look, I saw that the front piece was damaged very hard, the bolt on top had a lot of slack, the handle of the pump was broken and it didn't lock.
After this first look, I started to disassemble. All the parts were easy to remove and went very well and fast.
To remove the soot and patina I used a mixture of flour, salt and vinegar. This is a very effective and cheap method, it takes a bit of time but it's worth waiting. I left the parts for 7 days. I made a new bolt on the lathe and recut the thread. To make the bolt black, I heated it to around 300-400°C and played it in olive oil, making it also rust proofing. Because I couldn't fix the front piece, I decided to make a new one and it worked very well. I made the gasket for it out of an exhaust gasket, because it had one layer of aluminium in it I first made a hole in the mill, then cut it roughly out and finished it with the belt grinder. Next up I removed all the scratches from the tank with sandpaper. As I can't engrave I decided to scratch the letters deeper with a needle and then I polished it. I did the same with the same with the filler cap and made a new gasket out of cork for it. The shaft from the pump was bent very hard, so I did straighten it with a hammer and polished it. As the handle from the pump was broken and it didn't lock, I decided to make a new one. I designed the handle and I was inspired by pictures of similar blowtorches on the internet, I was quite happy with the result. To make a new leather for the pump, I soaked a piece of leather in pure gasoline. I made a die and stamp to bring the leather in shape. To dry it faster I set it on fire and waited until the flames stopped, held it quickly under water and left it for 24 hours to dry. I took it out of the die, cut it in shape with scissors and pooched a hole in it. I ground the black handle clean with sandpaper on the lathe and made a new profile on the mill, after that I polished it to make it black and shiny. I made a new wick with a cotton cord.
Then I put it all back together. I used just a little bit of grease on all the threads and also on the pump leather. The pump had very good compression after assembling and I was very happy about the overall looking at the end.
Sorry for my bad English, it's not my language. I try my best to improve my technical English.
Subscribe for more of my content. I'm uploading videos about mechanical stuff, such as new creations, buildings, and restorations.
Thank you for watching :-)
My Patreon Page:
https://www.patreon.com/mymechanics727
-
10:10
robbijan
1 day agoHollywood’s Hidden Messages: Predictive Programming & What’s Next
971 -
LIVE
SpartakusLIVE
2 hours ago#1 Rocket CHAMPION of Verdansk wields UNSTOPPABLE new META
308 watching -
40:13
MattMorseTV
1 hour ago🔴It's EVEN WORSE than we thought...🔴
2.6K24 -
LIVE
The Jimmy Dore Show
2 hours agoSnoop Dogg Is DONE w/ LBGTQ+ Propaganda In Kids Movies! Trump Outlaws Burning the U.S. Flag!
7,733 watching -
LIVE
MissesMaam
3 hours agoDying Light w/ Da Bois💚✨
86 watching -
LIVE
Sgt Wilky Plays
34 minutes agoThe Finals with the Pack
61 watching -
32:55
Clickbait Wasteland
8 hours ago $0.05 earnedAsking New Yorkers Who They Support For Mayor: Wall Street
15 -
LIVE
Spartan
25 minutes agoLittle bit of Halo and Expedition 33
15 watching -
LIVE
Fragniac
2 hours ago🔴LIVE - FRAGNIAC - THE FINALS w/ The @BrrrapPack❗ ( -_•)╦ ╤─💥
20 watching -
LIVE
LIVE WITH CHRIS'WORLD
2 hours agoLIVE WITH CHRIS’WORLD - A Shocking New Twist to The Same Old Game
144 watching