How to Disassemble and Reassemble the Kimber's Micro 9

Workman Firearms

#workmanfirearms #kimber #micro9

"Disassembly and Reassembly of Kimber's Micro 9" by Workman Firearms:

### Disassembly:
1. **Clearing the Firearm:** Adam removes the magazine and racks the slide to the rear. He physically and visually inspects the chamber and mag well to ensure the firearm is clear.

2. **Takedown Pin:** Adam lines up a half-circle notch on the slide with the takedown lever. Using a Glock tool, he pushes a pin from the other side of the frame, which falls out.

3. **Slide Removal:** The slide is removed from the frame.

4. **Recoil Spring:** Adam carefully removes the recoil spring, noting that it is not attached to the recoil rod and could go flying if not handled carefully.

5. **Barrel Removal:** The barrel is lifted up and out of the slide.

### Reassembly:
1. **Barrel:** The smooth part of the barrel faces down and is slid into the slide from the front.

2. **Recoil Spring and Rod:** The spring is placed on the rod and pushed into the front of the slide. The rod sits into the front of the barrel.

3. **Slide onto Frame:** The slide is aligned with the frame's rails and slid back.

4. **Inserting the Takedown Pin:** The takedown pin is inserted back into the frame, clicking into place.

5. **Function Check:** Adam performs a function check to ensure the firearm is properly reassembled.

The tutorial is clear, concise, and provides valuable information for anyone looking to understand the inner workings of Kimber's Micro 9 or perform maintenance on their own firearm.

Legal Notice: All content on the Workman Firearms Training Group YouTube channel reflects our own opinions and should NOT be taken as legal advice. Please seek out the guidance of professionally trained and licensed individuals before making any decisions.

Disclaimer: These videos are strictly for educational and entertainment purposes only. All work on arms should be carried out by a licensed individual, and all state and federal rules apply to such work. We (including YouTube) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of our videos.

Disclaimer: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide, Workman Firearms may receive a small commission. There is no additional charge to you! Your support helps us continue our mission to empower individuals with the knowledge to protect themselves and their loved ones, and to maintain the quality of our training services. Thank you for supporting Workman Firearms and Range 42, and for being a part of our commitment to safety, individual rights, and responsible firearm ownership.

Recommended Gear:

https://amzn.to/3QN1Gy4 - Hearing Protection
https://amzn.to/45tSItm - Shooting Glasses

https://amzn.to/3sn5aNg - Glock tool
https://amzn.to/3QKZdEj - Glock Parts Tray
https://amzn.to/3seZbKt - Glock Mag Loader
https://amzn.to/3KLDoAu - Base plate tool