How To Replace Front Brakes 2004-10 Toyota Sienna

Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2004-10 Toyota Sienna.

This process should be similar on the following vehicles:
2004 Toyota Sienna
2005 Toyota Sienna
2006 Toyota Sienna
2007 Toyota Sienna
2008 Toyota Sienna
2009 Toyota Sienna
2010 Toyota Sienna

Tools you will need:
• 14mm Wrench http://1aau.to/oa/1AXAA00010
• 17mm Socket http://1aau.to/oa/1AXAA00015
• 21mm Socket http://1aau.to/oa/1AXAA00043
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. http://1aau.to/oa/1AXAA00278
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Brake Grease
• Copper Anti-Seize
• Hammer http://1aau.to/oa/1AXAA00091
• Wire Brush http://1aau.to/oa/1AXAA00079