Qolsys IQ Panel 4: Performing Panel Tests

In this video, Dylan from Alarm Grid will show you how to use the Qolsys IQ Panel 4 Test features. The IQ4 has a full series of available tests and allows you to test everything from the WIFI connection to the Panel's Input Voltage.

0:00 Start
0:36 Enter Test Screen
1:21 WIFI Test
1:52 Sensor Test
3:12 Cellular Test
4:17 Z-Wave Test
9:31 PowerG Test
10:30 PowerG Signal Strength
11:04 Panel Glass Break
12:05 Dual-path WIFI Test
12:47 Daughter Cards Test
13:37 Panel Tests
16:30 Input Voltage Test

This video skips the Ambient Noise Test in favor of the Panel Glass Break Test. You can use one or the other of these features, but not both. If the Panel Glass Break feature is enabled, then the Ambient Noise feature is disabled. If you disable the Panel Glass Break feature, you can enable the Ambient Noise Level feature, and then set an acceptable ambient noise level. If the panel hears the ambient noise exceeding that level, it will sound an alert.

https://www.alarmgrid.com/faq/how-do-i-perform-tests-on-the-qolsys-iq-panel-4-panel

http://alrm.gd/get-monitored