Router Table under $20 - DIY

I needed a router table, so instead of buying an expensive, bulky one, I designed and built my own. You can build one with a piece of 2'x4' 1/2 plywood and a piece of 2'x4' hardboard for under $20. If you want to get fancier, you can install a switch, and even a vacuum port. The top overhangs the base by 2" all around so that later, I can build a fence.

If you are interested in buying any of my wooden crafts, check out my Etsy store:
https://bit.ly/3OPLzhv