2 years ago

A bit of a rough start, but I got it figured out!

Recommendations after this flight-
CG Range 45-47mm from LE
Up/Down Throw- 5mm each way
Aileron Throw- 6mm each way
Neutral Trailing Edge Setting- 1.5mm up

Electric Model-
Consider 2-3 degrees of down thrust in motor installation

The CCM Riddick is proudly made in Ukraine. This little flying wing has a 1.2 meter span. It is available as a pure glider for the slope (light and hard versions) as well as a light eclectic model for sport flying and thermal flying. It is fully composite, the wings are all carbon fiber and the fuselage is fiberglass.

Total flying weight after assembly- 336 grams or about 12oz, should thermal well! Very light.

More details here-
https://flightcomp.com/collections/slope-sport
https://ccm.in.ua/en/catalog/r-c-models/

Items used in assembly-
Motor mount- https://flightcomp.com/collections/cnc-motor-mounts/products/gcm-25mm-f5k-cnc-motor-mount
Motor- https://flightcomp.com/collections/direct-drive/products/t-motor-f30-f5k
Prop- https://flightcomp.com/collections/folding-props/products/ccm-f5k-slim-carbon-folding-props
Spinner- https://flightcomp.com/collections/spinners/products/ccm-25mm-f5k-spinner-cnc
Battery- https://pyrodrone.com/collections/2s-batteries/products/dogcom-560mah-2s-14-8v-150c-lipo-battery-xt30