Printer Canon Pixma TS3440 (and series) Code P07 Error Causes and Possible Solutions (2023)

Printer Canon Pixma TS3440 (and series) Code P07 Error Causes and Possible Solutions (2023)

The error code P07 on Canon Pixma TS3440 (and series) printers indicates that the waste ink absorber is full. This is a small reservoir that collects ink that is used during the printer's cleaning cycles. When the absorber is full, it will no longer be able to collect ink, and the printer will display the P07 error code.

There are a few possible causes of the P07 error code:

The printer is not properly connected to the computer.
The printer is not turned on.
The printer is in error mode.
The waste ink absorber is full.
To fix the P07 error code, you can try the following steps:

Check the printer's connection to the computer. Make sure that the printer is turned on and that the USB cable is properly connected.
Turn on the printer. If the printer is already turned on, turn it off and then back on again.
Reset the printer. To do this, hold down the power button and the stop button for 10 seconds. The printer will then reset itself.
Replace the waste ink absorber. If the waste ink absorber is full, you will need to replace it. This is a relatively simple process, and there are instructions available online.
If you have tried all of these steps and the P07 error code is still displayed, you may need to contact Canon customer support for further assistance.

Here are some additional tips for preventing the P07 error code:

Regularly clean the printer's print heads. This will help to prevent ink from building up in the waste ink absorber.
Use genuine Canon ink cartridges. Using third-party ink cartridges can sometimes cause the waste ink absorber to fill up more quickly.
Keep the printer in a cool, dry place. This will help to prevent the ink from drying out and clogging the print heads.
I hope this helps!