How to Build a Raised Garden Bed for less than $15
Gardening season is in full swing and I'm trying out some raised garden beds on the farm thus year to improve or water drainage issues. We've been getting a lot of rain and or clay soil is getting really compacted and takes forever to drain. So raised garden beds it is! I've made four already and it's such a quick and easy project that I decided to make a video tutorial and share it with you in hopes of giving you some inspiration to try your hand at growing some food this year!
There are a lot of videos and blog posts on inexpensive ways to build your own garden beds but many of them were not very inexpensive solutions in my eyes. I was able to make mine for very little money so I'm sharing what I did in this video with you.
Before using any power tools please practice safety precautions to ensure proper and safe use of all tools and supplies. Read and follow manufacturer's instructions for the tools and supplies you are using. Use eye and hand protection if the project requires it and of course, have fun!
Supplies you'll need:
• Two 2x8x8 foot boards of untreated wood- I used pine but if you can get a good deal on some cedar or redwood then that would be better since they are both naturally rot resistant and should last longer.
• 4 wooden chunks of a 2x4 cut to the width of the board you are using. In my case it was 7 3/8".
• about 20 outdoor/exterior wood screws at 2.5".
• Cordless drill with predrilling/countersinking bits
This 4 foot x 4 foot raised bed cost me just under $15 and is a great way to start growing food, herbs or even just flowers.
Give it a try!
Thanks for watching!