Did Capacitors FIX my NRF24 Problems with AS01 Ashining chip on AWOK Dual Board (or esp32cam)???

This is a follow-up to my video about mousejacking and the problems I was experiencing with the ASO! chip on my AWOK DUO Board. Since I had originally thought that the AS01 chip was defective. I ordered 2 more from Amazon. When they arrived, I swapped out the original one, but it behaved exactly the same, so I took the 2nd one, and wired it up with dupont wires just in case there was a problem with the duo board itself. However, it also behaved exactly the same. None of the 3 AS01's I have work in any capacity to send a payload, but they all will register or sniff the mouse if I am sitting in near enough proximity to the dongle of the mouse being jacked. I therefore plan to remove the AS01 chip from the board (again) and replace it with a NRF24L01 like the one shown on the uberguidoz github: https://github.com/UberGuidoZ/Flipper/tree/main/GPIO
the pinouts are the same, and it should sit flush and eliminate the need for an antennae since the NRF24L01 has a much better reach than the AS01 from my experience anyway. Out of all my various builds, only 2 of them have given me troubles, The ESP32CAM (which might have been a faulty chip) and the AS01 on my AWOK DUO board (nrf24 side only) so I will report back when done so I can show yall the results.