Name: Splines & Brakes Clutches & Gears 3
Uploaded: 2023-06-23T12:18:11+00:00
Duration: 40 min 39 s
Description: I start the set up to grind the center of the gear that had the bore scored by the two keyways shearing and galling the bore. I mount and machine a set of soft jaws to hold the gear so it will run tru

2 years ago

231

Monarch CK 12 3D Scanning Peel 2 3D CAD s Keith Fenner Fenner machine shop Turn Wright Machine Works welding tig welding heliarc job shop

I start the set up to grind the center of the gear that had the bore scored by the two keyways shearing and galling the bore. I mount and machine a set of soft jaws to hold the gear so it will run true , the gear pitch and the side thrust surfaces before grinding the bore true again.
Life is good!
Cheers, Keith

Wazer's website : http://www.wazer.com
Link to The Peel 2 3D Scanner: https://ultimate3dprintingstore.com/products/peel-2-cad-s-3d-scanner?utm_source=youtube&utm_medium=turnwright
Link to all Peel 3d Scanners: https://ultimate3dprintingstore.com/collections/peel-3d?utm_source=youtube&utm_medium=turnwright
Link to American Rotary: https://www.americanrotary.com/
Hot Sot Ovens: https://barzindustrial.com/hotshot-ovens
https://www.americanrotary.com/product-category/hot-shot-ovens/