Building A Sheet Metal Brake (Bender) From Scrap

3 years ago
6

Get the plans: https://www.resystech.com/sheet-metal-brake.html
Check out the build article: https://www.resystech.com/howtobuildasheetmetalbrake.html

I needed a heavy duty sheet metal brake to bend the 1/8" (3mm) thick aluminum that I chose for the crosskart body panels, so I made one with scrap steel angle and tubing, lawnmower seat springs and threaded rod. It's a common DIY design, but I beefed it up for my needs. So far I've bent 1/8" thick aluminum @ 24 (610mm) wide successfully. No signs of stress on the brake, but it took some muscle to do. I'm sure it can bend a 36" (914mm) wide sheet with hydraulics or handle extensions for more leverage. I'm going to have to build a proper steel table to mount it to first, otherwise I'll probably rip the end off the wooden table that it's mounted to now.

Support RST on Patreon or Youtube to get rid of the ads and earn membership perks like access to all project plans featured on resystech.com:

http://www.patreon.com/resystech
https://www.youtube.com/channel/UCtrf6ZiE6hw3k77hGpnuQWg/join

Follow RST on Facebook:
https://www.facebook.com/RenewableSystemsTechnology

Loading comments...