Making Fiberglass Molds

5 years ago
32

Check out my latest project: https://youtu.be/yXQnydST9fw

Check out the complete build video for the 3 kW Reaper turbine: https://youtu.be/EPmW-BjCiWI

Plans for the turbine are available here: https://www.resystech.com/3-kw-wind-turbine

Making Fiberglass Molds - part 5 of the Reaper wind turbine build. In this video I make the fiberglass molds that will be used to form the blades and nose cone in the next video.

For the back blade mold I used 4 layers of 7 oz (200g) fiberglass cloth with 1/4"x3/4" wide plywood strips laminated between the last two layers for rigidity (each layer of fiberglass was oriented with the weave at 45 degrees to the previous layer). This seemed like overkill for a mold, so I switched to just 3 layers and plywood strips for the front blade mold. It worked out just fine.
I couldn't use wood strips on the nose cone (for obvious reasons), so for the first layer I used 2 oz (57g) fiberglass matt to make the cone rigid, then followed it with a layer of 7 oz cloth for strength.
FYI - fiberglass matt isn't as strong as fiberglass cloth. Fiberglass matt consists of oriented strands of fiberglass (almost similar to fiberglass insulation) and is typically thicker than fiberglass cloth of the same weight. Fiberglass cloth consists of weaved fiberglass strains that essentially 'lock' together and can be harder to work with around contoured surfaces. For these reasons, fiberglass matt is usually used to provide thickness and rigidity where needed, and fiberglass cloth is used for strength and flexibility.

I don't have a lot of experience working with fiberglass, so if any experts out there have some tips they'd like to share, please feel free.

Reaper project details: https://www.renewablesystemstechnology.com/3-kw-axial-flux-hawt

Lathe build video:
http://bit.ly/DIYLathe

Download the lathe plans:
http://bit.ly/LathePlans

Master blade video:
http://bit.ly/BladeCarving

Don't like ads? Neither do I. I hate them. That's why I signed up for a premium Youtube account for $12/month so that I never have to see another ad on this site again, and feel good knowing that I'm contributing to the creators I like so that they keep posting more great content. I highly recommend it. If you're just here to watch my videos, that's cool too. You can help support me specifically by signing up for a channel membership instead. Then just keep an eye on the community tab to watch these videos free of advertisements. You'll also get other perks, too. Check out the links below if you're interested.

Youtube premium account:
https://www.youtube.com/premium?ybp=Sg0IBhIJdW5saW1pdGVk

Support RST specifically:
http://www.patreon.com/resystech
https://www.youtube.com/channel/UCtrf6ZiE6hw3k77hGpnuQWg/join

Follow RST on Facebook:
https://www.facebook.com/RenewableSystemsTechnology

Loading comments...