How to Make Twin Motor ATR-72 600 RC Plane Part 3

In this last part of building ATR-72 600, I'm going to share with you how to make wing and motor mounting, also aileron and flaps. In this ATR we're going to make flap hinge from 3mm plywood. This plane use twin turnigy 1400kv motor with 7x4 3 blade prop. The livery of this plane is Citilink

#rcplane #rcairliner #diyrcplane

You can download the plan here :
https://paper-replika.com/RCplans/PR_ATR-72_Part_3.pdf

Build instructions :
https://paper-replika.com/index.php/rc-foam-project/atr-72-600-rc-plane-part-3

DONATE via Paypal : Juliusperdana@yahoo.co.id

Part 1 : https://youtu.be/FzS4BcldR-g
Part 2 : https://youtu.be/-6JM7klQdtE
Part 3 : https://youtu.be/IUViVnkhTpY

SUBSCRIBE dan Like to support this channel

Playlist :
00:52 Wing Root
05:33 Wing
18:00 Flap Hinges
18:47 Covering
27:44 Paint and Decal
32:44 Closing

Specs :
1. Wingspan 180 cm / 70.9 inches
2. Flying weight : 1800 gram / 63.5 oz
3. Wing loading : 46.5 g.dm2 / 15.2 oz/sq.ft
4. Wing cube loading : 7.5
5. Wing Area 38.7 dm2 - 600 sq.in

Electronics
- 2X Turnigy 2826 1400kv motor
- 2X ESC 40A
- 1X / 2X Battery Lipo 3S 2200mah / Li-ion 3S 3300 mah
- 4 metal gear 9 gram servos
- 3 plastic gear 9 gram servos
- Propeller : 7x4x3

Materials :
1. 5mm Depron/ Polyfoam
2. 3mm Plywood

Tools :
1. Covering iron https://amzn.to/38YZyMh
2. Heat gun https://amzn.to/3A1cvkR
3. Hot glue gun https://amzn.to/38XyrkY