GA8 Airvan RC Plane - DIY Build and Fly

Save
5 years ago
47

I redesign my old plans on this GA8 Airvan RC plane model. This new version has better performance on flight, more lift, more stable and easier to control. I made the airfoil thicker than the first version. This model is made out of 5 mm polyfoam or depron foam sheet. I choose FlyStark livery because I think that's the coolest Airvan color scheme on the net. This livery decal also shared along with the plans. If you enjoy my Cessna 172 model you will enjoy more, building and flying this model and it's easier to build and fly. It only needs 4 servos, there's no steering on the front landing gear, you can't turn on taxi but the rudder is enough to steer the plane when it's running for take off. The wing and wing struts are detachable for easier transport. I also include 2D pics for 2 pilots and 4 passengers to add realness of the model.

SUBSCRIBE dan Like untuk support channel ini
#rcplane #airvan #bushplane #buildvideo

You can download the plans on the link below :
A4 Plans : https://paper-replika.com/RCplans/PR_Airvan_A4.pdf
A0 Plans : https://paper-replika.com/RCplans/PR_Airvan_A0.pdf
A3 Decal : https://paper-replika.com/RCplans/Flystark_decal.pdf

Build instructions :
https://paper-replika.com/index.php/rc-foam-project/ga8-airvan-rc-plane

DONATE via Paypal : Juliusperdana@yahoo.co.id

Playlist :
02:21 Plan Preparation
03:46 Wing
10:58 Fuselage
18:08 Cover The Aircraft
24:54 Stabilizers
29:02 Decalling
32:46 Wing Mounting
35:36 Landing Gear
39:03 Accessories
42:47 Control Surface Linkages
45:59 Battery Hatch Door
49:49 Maiden Flight
33:48 Review

Specs :
1. Wingspan 1200mm / 47.2 inches
2. Flying weight : 910 grams/ 38.8 oz
3. Wing loading : 40.1 gram/dm2 - 13.1 oz/sq.ft.
4. Wing cube loading : 8.4
5. Wing Area : 22.7 dm2 / 352 sq.in.
6. CG : 5 cm

Electronics
- motor 28/22 1000kv - 1400kv brushless motor
- Tested with Turnigy 2830 1000kv brushless motor prop 9x4.5x3
- ESC 40A
- Battery Lipo 3S 2200mah /Li-ion 3S 3300 mah
- 4 plastic gear 9 gram servos

Materials :
1. 5mm Depron/ Polyfoam
2. 3mm Plywood
4. 0.3mm Mica Plastic
5. hot glue
6. white packing tapes https://amzn.to/3ttYTMp

Tools :
1. Covering iron https://amzn.to/38YZyMh
2. Heat gun https://amzn.to/3A1cvkR
3. Hot glue gun https://amzn.to/38XyrkY

Loading comments...