How to Build RC Airliner Boeing 737 Part 1

There are many request for me to build an RC airliner. I once build a small Boeing 737-800 in the past, the wingspan only 1400 mm/55 inch with pusher prop. But I haven't made the build video tutorial of it and the plans for you to build. So here it is Boeing 737-300 with 1800mm/71 inch wingspan. I will still use pusher prop, this time I will use twin pusher props. No EDF yet, because I haven't use EDFs before, so I will not make this huge model to learn using it. I will make F-35 after part 2 of this Boeing 737 to learn how to use EDF. If it succeed, I will make other EDF airliner in the future.

SUBSCRIBE and Like to support this channel
#rcairliner #rcboeing #rcdepron #rcplans

You can download plans on this link
A4 Plans : https://paper-replika.com/RCplans/PR_Boeing_737_300_Complete_A4.pdf
A0 Plans : https://paper-replika.com/RCplans/PR_Boeing_737_300_Complete_A0.pdf
A3 Decal : https://paper-replika.com/RCplans/united_airlines_737300_decal.pdf

Build instructions :
https://paper-replika.com/index.php/rc-foam-project/rc-airliner-boeing-737-300

DONATE via Paypal : [email protected]

Playlist :
01:47 Plan Preparation
02:45 Fuselage
06:19 Installing Landing Gear
10:41 Nose Section
15:42 Next Project?

Specs :
1. Wingspan 1800mm / 71 inches
2. Flying weight : target below 2000 grams/ 70.5 oz
3. Wing loading : -
4. Wing cube loading : -
5. Wing Area : -
6. CG : -
7. 1 set of Servoless Retractable Landing Gear

Electronics
- 2X Turnigy 2826 2200kv brushless motor
- 2X ESC 40A
- Battery Lipo 2X 3S 2200 - 3S 5200mah - 2X Li-ion 3S 3300 mah
- 3 plastic gear 9 gram servos
- 3 metal gear 9 gram servos
- Propeller : 7x5 APC

Materials :
1. 5mm & 10mm Depron/ Polyfoam
2. 3mm Plywood
4. 0.3mm Mica Plastic
5. hot glue + CA glue + UHU glue
6. white packing tape

Tools :
1. Covering iron https://amzn.to/38YZyMh
2. Heat gun https://amzn.to/3A1cvkR
3. Hot glue gun https://amzn.to/38XyrkY