Making RC Douglas DC-3 Part 2

In this DC-3 build part 2 I am going to share with you how to make the horizontal stabilizer, steerable tail wheel and servo platform. I use separate servos for moving the rudder and tail wheel. They will be mixed together so they will have co-axial movement. You will need 5mm carbon tube with 100 cm length for horizontal stabilizer spars. I also use ready made plastic hinges for the elevators.

SUBSCRIBE and Like to support this channel
#dc3 #rcplane #buildvideo

You can download the plans on the link below :
A4 Plans : https://paper-replika.com/RCplans/PR_DC-3_Part2_A4.pdf
A2 Plans : https://paper-replika.com/RCplans/PR_DC-3_Part2_A2.pdf

Build instructions :
https://paper-replika.com/index.php/rc-foam-project/douglas-dc-3-rc-plane-part-2

DONATE via Paypal : Juliusperdana@yahoo.co.id

 Specs :
1. Wingspan 2200mm / 87 inches
2. Flying weight : -
3. Wing loading : -
4. Wing cube loading : -
5. Wing Area : 25.2 dm2 / 391 sq.in
6. CG : -

Electronics
- 2X Turnigy 2830 1000kv brushless motor
- ESC 40A
- Battery Lipo 3S 2200mah - Li-ion 3S 3300 mah
- 4 plastic gear 9 gram servos
- 5 metal gear 9 gram servos
- Propeller : 9x6x3

Materials :
1. 5mm & 10mm Depron/ Polyfoam
2. 3mm Plywood
4. 0.3mm Mica Plastic
5. hot glue + CA glue + UHU glue
6. white packing tapes and gray packing tapes

Tools :
1. Covering iron https://amzn.to/38YZyMh
2. Heat gun https://amzn.to/3A1cvkR
3. Hot glue gun https://amzn.to/38XyrkY