How to Build T-6A Texan II RC Plane

I'm back making not so large RC model again, this time around 1 meter wingspan. I already aimed for this T-6A Texan II US Air Force trainer plane to make an RC flying model of it for some time. I already know it will be a good flyer by looking of its slick fuselage and dihedral type low wing, and it is. The building process is also relatively easy and can be build in about a week. The main material is 5mm depron or polyfoam you can also use foamboard. The landing gear that comes with the plans is fixed type landing gear, but you can easily change it to retractable landing gear to give more scale looks. The model is already have scale looks like the real thing, but actually this model is a semi scale model, because I modify the wing larger and make all stabilizers more surface area. I like this model because of the scale look and how easy to control.

SUBSCRIBE dan Like untuk support channel ini
#rcplane #texan2 #t6texan2

You can download the plans on the link below :
A4 Plans : https://paper-replika.com/RCplans/PR_T6_Texan_II_A4.pdf
A0 Plans : https://paper-replika.com/RCplans/PR_T6_Texan_II_A0.pdf
A3 Plans : https://paper-replika.com/RCplans/USAF_Texan2_decal.pdf

Build instructions :
https://paper-replika.com/index.php/rc-foam-project/t-6a-texan-ii-rc-plane

DONATE via Paypal : Juliusperdana@yahoo.co.id

Join this channel to get access to perks:
https://www.youtube.com/channel/UC64lnLfKm09f13iayaCOX0A/join

Playlist :
00:00 Intro
01:14 Wing
05:13 Fuselage
06:51 Installing Motor and ESC
08:31 Wing Mounting
08:41 Servo platform
09:26 Covering
10:52 Control Surfaces
11:47 Canopy and Decals
18:45 Landing Gear
20:19 Linkages and CG
23:30 Battery Tray
24:15 Maiden Flight
27:51 Second Flight
29:40 Review

Specs :
1. Wingspan 1200mm / 42.2 inches
2. Flying weight : 1010 grams/ 42.3 oz
3. Wing loading :40.2 gram/dm2 - 13.2 oz/sq.ft.
4. Wing cube loading : 8
5. Wing Area : 25.11 dm2 / 389 sq.in.
6. CG : 7 cm from LE

Electronics
- DXW 3536 1200kv Brushless motor
- 50A ESC
- Battery Lipo 3S 2200mah 70C
- 4 x 9 gram servos (micro servo) https://amzn.to/2X5GdXH

Materials :
1. 5mm Foamboard/ Depron/ Polyfoam
2. 3mm Plywood / PVC foam board
3. 0.3mm Mica Plastic
4. hot glue, UHU glue, CA glue
5. packing tape/ laminating film https://amzn.to/3ttYTMp

Tools :
1. Hot glue gun https://amzn.to/3BXwfGs
2. Heat gun https://amzn.to/3lawF5H
3. Covering iron https://amzn.to/3k2kM2s