How to Make Zenith CH750 RC Plane and Fly it

2 years ago
20

This video is a continuation from previous video which is about how to design RC plane plans. When designing RC plane plans, we need to build and test it to fly so we can improve the plans. I made this model using Blender 3D program, Pepakura Designer and together with Inkscape. You can find part 1 of how to use it on my channel. This Zenith CH750 model is modelled exactly the same with the real one but it's smaller, the wingspan is 120cm or 47.2 inches. I usually modified, or enlarge the size of the wing and stabilizer when converting it to RC model, but this time I make it exactly scale for education purpose. The model finally can fly after some trial, but with some adjustment from the real one.

SUBSCRIBE and Like to support this channel
#zenith #rcplane #buildvideo

You can download the plans here :

A4 Plans : https://paper-replika.com/RCplans/PR_Zenith_CH750.pdf
A0 Plans : https://paper-replika.com/RCplans/PR_Zenith_CH750_A0.pdf
A3 Decal : https://paper-replika.com/RCplans/Zenith_CH750_Decal.pdf

Build instructions :
https://paper-replika.com/index.php/rc-foam-project/zenith-750-superduty-stol-rc-plane

DONATE via Paypal : Juliusperdana@yahoo.co.id

Playlist :
00:00 Opening
00:35 Wing
05:00 Stabilizer
05:39 Fuselage
06:48 Servo Platform
08:17 Installing Motor
09:51 Decal
10:18 Rudder & Elevator Hinges
11:00 Slats
11:39 Flaperon
12:25 Landing Gear
15:45 Wing Mounting
16:19 Wing Struts
17:36 Installing Servo
18:06 Connecting Elevators
19:22 Flights
21:37 Review & Next Model?

Join this channel to get access to perks:
https://www.youtube.com/channel/UC64lnLfKm09f13iayaCOX0A/join

Specs :
1. Wingspan 1200mm / 47.2 inches
2. Flying weight : 800 grams/ 28.2 oz
3. Wing loading : 38.1 g/dm2 - 12.5 oz/sq.ft
4. Wing cube loading : 8.3
5. Wing Area : 21 dm2 / 326 sq.in
6. CG : 6 cm from slat

Electronics
- Racestar BR2212 1400kv brushless motor
- ESC 30A
- Battery Lipo 3S 2200mah
- 4 plastic gear 9 gram servos
- Propeller : 8x6

Materials :
1. 5mm Depron/ Polyfoam
2. 2mm Plywood
3. hot glue + CA glue + foam safe glue
4. white packing tape

Loading comments...