07 Ford Edge 3.5L PCV Valve Replacement

In this video I take you along as I demonstrate how a PCV valve is removed and installed on an 07 Ford Edge equipped with a 3.5L N/A engine. This process is similar to later model Ford Edges but may vary in some ways. Always consult your repair manual for proper removal and installation instructions.

Note: when disconnecting the vapor management valve you will need to press down the lock at the top of the connector that connects to the vapor management valve while pulling the connector way from the valve. I did not explain this in the video.

Also, this should be obvious,but I did not actually change the PCV valve on the vehicle featured in the video. I simply removed and installed the existing valve. It’s not recommended to remove the valve unless you intend on replacing it. The valve doesn’t lock down as well once it is removed.

When installing new valve insure that it is locked into place and twisted fully into place.

DISCLAIMER
Barbour's Auto Help is not responsible for any damage or personal injury incurred in the process of performing any auto repairs done by you the viewer. Automotive repair is extremely dangerous. Repair your vehicle at your own risk. It is the viewers responsibility to verify all information and procedures as outlined in YOUR REPAIR MANUAL AND OWNERS MANUAL FOR YOUR VEHICLE. Owning and using a repair manual suited for your vehicle is essential for correctly and safely performing ANY repair to your vehicle. Always wear safety glasses, protective gloves and heed all instructions for use applicable to any piece of equipment you may use. Due to circumstances out of the control of Barbour's Auto Help, Barbour's Auto Help makes no guarantee that by the use of the information given in this video a quality repair will be made. Barbour's Auto Help makes no guarantee that the information provided is totally complete, synchronized and accurate. Verify everything using an appropriate repair manual. Verify everything with your own research.