Filling and Bleeding Cooling System 05 Hyundai Sonata
In this video I take you along as I fill and bleed the cooling system on an 05 Hyundai Sonata 2.7L V-6. The method I'm using will requires a "spill free" funnel such as the one shown in the video. Lisle makes this funnel and it is available for ordering online through various sources. Using this funnel allows for excellent and easy removal of air in the cooling system. Apart from using a vacuum fill system this is the best way to fill the cooling system in my opinion.
As mentioned in the video, it's a good idea to drive the vehicle for a bit and then let it sit (turned off) for 1-2 hours to allow the system to cool down and then check and adjust the coolant level again. Fill the radiator all the way to the top. Fill the coolant reservoir/ overflow bottle all the way to the max level indicated on the side of the coolant reservoir. You to not want to fill the coolant reservoir all the way to the top of the fill neck, fill it to the level shown on the side. Coolant goes into the reservoir and goes out. So, if you over fill it and the radiator gets hot it could overflow.
Guys be careful. Use caution when working around the cooling system. Things get very hot and you could very easily get burned especially if you are not paying attention. Always wear safety glasses or goggles. Wear protective gloves also. (Even if I'm not wearing gloves in the video.) YOU TAKE A RISK NO MATTER HOW CAREFUL YOU ARE OF GETTING SERIOUSLY BURNED OR INJURED WHEN PERFORMING AUTOMOTIVE REPAIR. DO SO AT YOUR OWN RISK.
Follow the instructions provided in the spill free funnel kit for proper funnel installation.
Here is a link to a video showing how to use a vacuum filler to bleed and fill a cooling system.
https://youtu.be/1beZZCBUnt0
DISCLAIMER
Barbour's Auto Help is not responsible for any damage or personal injury incurred in the process of performing any auto repairs done by you the viewer. Automotive repair is extremely dangerous. Repair your vehicle at your own risk. It is the viewers responsibility to verify all information and procedures as outlined in YOUR REPAIR MANUAL AND OWNERS MANUAL FOR YOUR VEHICLE. Owning and using a repair manual suited for your vehicle is essential for correctly and safely performing ANY repair to your vehicle. Always wear safety glasses and heed all instructions for use applicable to any piece of equipment you may use. Due to circumstances out of the control of Barbours Auto Help, Barbours Auto Help makes no guarantee that by the use of the information given in this video a quality repair will be made. Barbour'sAutoHelp makes no guarantee that the information provided is totally complete, syncronized and accurate. Verify everything using an appropriate repair manual.
Repair your vehicle at your own risk! Barbour's auto help does not guarantee a proper repair using these techniques.
Special thanks to my wife for checking my spelling on this video and all my videos. You're the best Babe!
-
7:28
Barbour's Auto Help
2 years ago $0.01 earnedBleeding And Filling Cooling System With Vacuum Filler (The Best Method in My Opinion!)
94 -
18:04
Barbour's Auto Help
4 years ago05 Hyundai Sonata 2.7L Radiator Replacement
7 -
9:36
gofasthavefun.ca
4 years agoHow to Bleed Coolant System Procedure Nissan 350Z & Infiniti G35 (Nissan 3.5L V6) | AnthonyJ350
47 -
40:33
gofasthavefun.ca
4 years agoNissan 350Z Radiator Removal, Installation and Bleeding Coolant System (In-depth) | AnthonyJ350
3 -
3:09
Nthefastlane
6 months agoEasy Way To Flush A Engines Cooling System
711 -
19:40
Endless Money Pits
3 years ago $0.03 earnedBMW Cooling System Overhaul 1998-2006 M52/M54
95 -
3:19
Fix it Angel Car Repair Channel
7 years agoSIMPLE Coolant Drain Fill Radiator Engine Block Toyota 4Runner √ Fix it Angel
46 -
9:24
Cars You Can Fix
1 year agoToyota Sienna 2GR-FE Coolant Flush and How to Bleed All The Air Out
126 -
1:52
gofasthavefun.ca
4 years agoNissan 350Z & Infiniti G35 Coolant Bleeder Location | AnthonyJ350
15 -
4:33
4DIYers
8 months agoHow to Pressure Test a Cooling System
22