Blower Motor and Blower Resistor Replacement 04 Ford Ranger

In this video I'll show how to replace the blower motor and blower resistor on an 04 Ford Ranger 3.0L. The process is rather simple and getting the motor and resistor replaced is very easy once room is made to replace them. By simply removing the air filter housing, positioning the cruise control unit out of the way, and moving the coolant reservoir and washer reservoir forward a bit the room needed to replace the blower and resistor is easily created. Once room is made simply disconnect said parts, unbolt them and replace them. The processes involve in replacing said parts is similar to other model year Ford Rangers. (Similar not the same and care should be taken to recognize the differences. This is where a manual will help.)

Note: It is suggested to perform this repair with the engine off and completely cooled.

DISCLAIMER
Barbour's Auto Help is not responsible for any damage or personal injury incurred in the process of performing any auto repairs done by you the viewer. Automotive repair is extremely dangerous. Repair your vehicle at your own risk. It is the viewers responsibility to verify all information and procedures as outlined in YOUR REPAIR MANUAL AND OWNERS MANUAL FOR YOUR VEHICLE. Owning and using a repair manual suited for your vehicle is essential for correctly and safely performing ANY repair to your vehicle. Always wear safety glasses and heed all instructions for use applicable to any piece of equipment you may use. Due to circumstances out of the control of Barbours Auto Help, Barbours Auto Help makes no guaranty that by the use of the information given in this video a quality repair will be made. Barbour'sAutoHelp makes no guaranty that the information provided is totally complete, syncronized and accurate. Verify everything using an appropriate repair manual. Follow the repair manual over this videos content. You can do it. Do it right and do it safely.