No Crank No Start Fixed By Recall R03 08 Chrysler Town and Country
This video is more of an informational video than a repair video. As mentioned in the video my mother in laws van had a "not start" or actually a "no crank no start" symptom caused by a faulty WIN module or "wireless ignition node" module. After testing some basic things on her vehicle, like battery, starter, and fuses, I came to the conclusion that the issue had to be ignition switch or key related. (albeit, the ignition switch on this vehicle is actually the WIN module and works differently than a regular ignition switch.) After doing some digging I found out that there was a recall, R03, still open for this vehicle. R03 involved the replacement of the WIN module and 2 keys. This service is provided free of charge to applicable vehicles. So, I sent it to the dealer with the hopes that replacing the WIN module would take care of the symptom. (R03 is intended to correct a problem with the key being turned from the "run" position to the "accessory" position due to being bumped. It is not intended to correct a "no crank no start" situation.) Much to my delight, the replacement of the WIN module and keys took care of the symptoms.
Here is a link to the recall. The particulars of the recall are outlined here:
https://www.chrysler.com/universal/webselfservice/pdf/R03.pdf
Give your dealership a call to see if this recall is applicable and is still open on your vehicle. If you have a "no crank no start" symptom on your vehicle a faulty WIN module COULD be the cause. If the recall is open for your vehicle then get the WIN and keys replaced. If it fixed your problem, then great. If not, then you will have to have the vehicle diagnosed to see what the actual cause of the problem is.
If you are having this symptom and the recall is not open on your vehicle or the recall does not apply to your vehicle then the "no crank no start" symptom could still be caused by a faulty WIN module. A proper diagnosis will be needed to confirm what the actual fault is. Repair accordingly.
Note: This symptom can be caused by many things other than a faulty WIN module. A proper diagnosis will be needed to confirm the cause and repair path for your vehicle. I do not in any way imply that replacing the WIN module and keys will fix your vehicle. This video is just meant to share my experience and share information. I wish you well and if you have questions comment bellow.
-
6:37
Paul Shinn
10 months agoHow to crank-start a Ford Model A by HAND!!
53 -
2:00
Barbour's Auto Help
3 years ago2008-2011 Ford Focus/ Escape/ Mariner No Crank No Start
10 -
0:31
Fix it Angel Car Repair Channel
8 years agoPUSH start button Reset maintenance light Toyota Camry √ Fix it Angel
10 -
6:33
Fix it Angel Car Repair Channel
7 years agoDiagnose Replacement Crank Seal Toyota Camry √ Fix it Angel
16 -
0:26
Fix it Angel Car Repair Channel
8 years agoStarter won't crank over engine WHAT TO DO?? √ Fix it Angel
18 -
24:06
Humble Mechanic
3 years ago2004 R32 TURBO Cranks but Will Not Start
20 -
1:22
Fix it Angel Car Repair Channel
8 years agoQuick Fix P0442 EVAP Small Leak Toyota Solara Camry √ Fix it Angel
15 -
6:47
gofasthavefun.ca
2 years agoGM Truck Won't Start, NO CRANK '99-2007 Classic Silverado, Sierra, Tahoe, Yukon | AnthonyJ350
31 -
1:19
Fix it Angel Car Repair Channel
8 years agoNO START How to check Timing Belt Toyota Camry √ Fix it Angel
7 -
3:43
CarSimplyClub.com
10 months agoHOW TO Get FREE REPAIRS from your Car Dealership! NEW DRIVER Advice! (DID YOU KNOW Ep.1)
1.13K1