Premium Only Content

Mounting Transmission - Tracked Amphibious Vehicle Build Ep. 8
Fabricating skid steer brake differential carriage frame and mounts out of flat steel and square tubing so the differential can be removed for repairs. Mounting transmission in place only with two bolts first so it doesn't move while fabricating and mounting other things. It needs more mounting points in the future though. This handmade tracked vehicle has a 20 HP V-twin engine that will be connected to the five speed Peugeot Partner gearbox with CVT - continuously variable transmission that will act as a clutch too. Side brakes will steer this ATV and also brake it (duh), operating the thumb throttle taken from a snowmobile mounted on one of the brake levers will give me a really simple vehicle operating pattern so it can be operated only by using your hands. The car wheels I use on this ATV leaked air so I had to remove the tyres and refurbish the rims. I went to a local car repair shop and asked for a set of used tires with a good bead on them which I yet have to transport home and mount on the rims. I still have to fabricate the engine mounts and turn the adapter so I can install one part (spreading pulley) of the CVT on the gearbox clutch shaft. I also have to take apart the front wheel drive gearbox's differential and lock it. One of the half axles will then be used as a prop shaft and that completes the powertrain. If for some reason these universal joints / tractor PTO parts fail (so I've been told, never seen in the homestead / farm in practice over a couple of decades though) I can replace them and the poor Lada / Fiat differential, if needed, with a beefier BMW E36 independent rear suspension - differential, half shafts, the whole deal. So no worries! Thanks for watching, share, comment and subscribe for more because more will come!
#donndiy #trackedamphibiousvehicle #atv
This video is part of a series of videos, check out the series here: https://www.youtube.com/playlist?list=PLkmF7FAZBzkWdzAxcrnz-WJbzSRyqrSBt
Check out other videos on my channel page: https://www.youtube.com/c/DonnDIY
Soundtrack:
Pomade - Silent Partner (YouTube Audio Library)
Welding equipment:
Fronius TransSteel 2700
Optrel Crystal 2.0 Welding Helmet
-
26:31
Donn DIY
2 years agoSwingblade SAWMILL Build Ep.1 - Blade Adapter Machining & Swing Frame Fabrication
3491 -
9:39
MattMorseTV
12 hours ago $0.72 earnedVance just DROPPED a BOMBSHELL.
24.1K60 -
23:47
GritsGG
1 day agoThe Forgotten Best Sniper Support AR!
1321 -
1:15:48
The Pascal Show
14 hours agoMUGSHOTS RELEASED! Emmanuel Haro's Parents Mugshot Released To The Public
185 -
14:45
BlabberingCollector
17 hours agoKings Cross Station SET LEAKS! | Harry Potter HBO Show Update & News
39 -
33:20
SB Mowing
9 days agoHealth Struggles + Endless Rain = A Yard Out of Control
2.28K18 -
1:09:42
Mike Rowe
4 days agoHow Did THIS Dirty Job Make Tommy Mello A Billionaire?! | #447 | The Way I Heard It
54.6K19 -
LIVE
SpartakusLIVE
9 hours agoThe BADDEST Duo in WZ Exhibits PEAK Physique || Duos w/ Sophiesnazz to start, quads later
6,017 watching -
2:49:37
RattlesnakeTV
21 hours ago $0.15 earnedLIVE DEBATE! Lord Jake vs Crazy Feminist
21.5K11 -
4:00:42
Badlands Media
12 hours agoThe Narrative Ep. 35: Codex of Truth
87.9K44