4x4 PTO Driven Timber Trailer BUILD Ep.10 - Log Barrier & Posts
4x4 PTO driven timber trailer build continues. Attaching the hydraulic side stablizer to see where the edge of the trailer's log fence / front barrier will be when the stabilizer is in the upper position since it has to mimic the shape of the stabilizers. Drawing up a basic sketch in FreeCAD to get all the measurements of the tubes required for this frame. Welding all the parts on my homemade welding table. A bigger welding table is definitely needed. Completing the log fence with scrap 21mm outside diameter scrap steel tubes that have been laying in the workshop under the lathe for a couple of years now. Cutting the log fence base plate on my homemade CNC plasma table. This table my buddy at Blackloop CNC helped me build has been a great asset. Getting a CNC plasma these days is super affordable and shortens the fabrication time tremendously. I'm quite happy with it. In the last quarter of the video I'm drawing up and fabricating log posts / log stops from S355 50x50x3mm square tube so the timber I'm going to haul will not roll off the trailer. To strengthen these log posts different types of gussets are needed to take the stresses off of the inner and outer corner welds. Also proper mounts to trailer frame are needed. But all of that in the next video. To be continued. Stay tuned!
Trailer specs:
* 28x11-14" tires & 14" rims
* 1450mm/57" wide; length and height - unknown
* tandem axles with homemade chain housings
* BMW E39 530D differential with 2.81 gearing (identical to the UTV diffs)
* hydraulic crane with a boom & grapple for easier log loading & handling
* independent hydraulic power pack
* radio controlled hydraulic winch on the boom
* load capacity - 1-1,5 metric tonne
Stay tuned for the next episode & thanks for watching!
My other videos: https://www.youtube.com/DonnDIY/videos
Support me on: https://www.patreon.com/DonnDIY
Follow me on: https://www.instagram.com/DonnDIY
4x4 PTO Driven Timber Trailer BUILD series: https://youtube.com/playlist?list=PLkmF7FAZBzkXTeVlXqnK4C1_vWCCHie68
Homemade 4x4 UTV build: https://youtube.com/playlist?list=PLkmF7FAZBzkUZ3GjEo97GkWajmj9bCxzE
#donndiy #homemade #timbertrailer
Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter
-
26:31
Donn DIY
1 year agoSwingblade SAWMILL Build Ep.1 - Blade Adapter Machining & Swing Frame Fabrication
2871 -
3:48:44
Badlands Media
1 day agoEye of the Storm Ep. 134 - 10:30 PM ET -
80.6K76 -
3:42:24
SNEAKO
9 hours agoSECRET STREAM SECRET SURPRISE
83.3K26 -
2:31:41
GruntStyleGaming
10 hours agoEnlisted: Featuring LumpyPotatoX2 - #GSPatrioticSummer
42.1K5 -
7:59:24
FusedAegisTV
16 hours agoXIV TUESDAYS! I AM THE RUMBLE MASTER OF THE RUMBLE WARRIORS | Makin' Moves (6.3)
48.5K4 -
44:33
The Anthony Rogers Show
19 hours agoEpisode 321 - Mickey Avalon
35.3K2 -
1:32:11
Glenn Greenwald
14 hours agoMedia Converts Taboos About Ukraine Into Acknowledged Truths; Orthodox Rabbis on Condemning Israeli War; PLUS: Media Denies Biden’s Decline | SYSTEM UPDATE #284
82.9K225 -
37:44
Candace Owens
11 hours agoEverything We Learned About World War 2 Is A Lie | Candace Ep 7
73.8K318 -
42:09
The Late Kick with Josh Pate
13 hours ago $1.01 earnedLate Kick Live Ep 523: CFB 2024 Unknowns | Dabo Legacy Debate | Big12 Over Big Ten | Mon Title Games
41.1K1 -
1:01:42
The StoneZONE with Roger Stone
14 hours agoEric Adams and P. Diddy To Be Indicted? EPIC NYC Corruption Exposed | The StoneZONE
61.1K40