Flashforge Dreamer (NX) Using a 0.2mm Nozzle and a Glass Print Bed - Part 1
This video series shows my experience with a 0.2mm nozzle and a glass print bed to print Star Wars credits for my Etsy store that have fine detailed lettering on both sides.
Part 1 covers:
1) Comparing the 0.2mm nozzle to the 0.4mm nozzle I typically use.
2) Installing the nozzle in the printer.
Part 2 covers:
1) Testing the nozzle with the standard FlashForge print surface.
2) Trying a glass surface.
Part 3a covers:
1) What I learned after a month of printing on glass with a 0.2mm nozzle - Part A
Part 3b covers:
1) What I learned after a month of printing on glass with a 0.2mm nozzle - Part B
Here's a link to the double-sided Star Wars credits I printed with this setup:
https://www.etsy.com/listing/1157516314/star-wars-the-book-of-boba-fett-new
Here's a link to the 0.2mm nozzle on Amazon:
https://smile.amazon.com/dp/B01LOYIGYM
Here's a link to the needle kit:
https://smile.amazon.com/dp/B07KC6VTDF
Later I found a set of 0.2mm needles by themselves (might be out of stock):
https://smile.amazon.com/dp/B06X15JCDS
Here's a link to the glass print bed I used:
https://smile.amazon.com/dp/B00WW58DXW
Here's a link to the binder clip set I bought since I wasn't sure exactly which size I needed:
https://smile.amazon.com/dp/B07DXSBT5J
These are the spatulas I used to help remove the pieces from the print bed:
https://smile.amazon.com/gp/product/B075SLTY8B/
These are the tweezers I used to help remove dripping filament from the print head:
https://smile.amazon.com/gp/product/B0845SKD7Z/
The wire brushes I use are no longer sold on amazon, but here's something similar:
https://smile.amazon.com/ABN-Inch-Detail-Brush-3-Piece/dp/B0195PCMF6/
Flashforge Dreamer NX on Amazon:
https://smile.amazon.com/gp/product/B07DPBRCYZ/
-------------------
Link to my Etsy Store:
https://www.etsy.com/shop/BetaCygniDesigns
---------------------
End Screen Video Acknowledgement: Cosmic Reef Video produced by NASA and the Space Telescope Science Institute (STScI).
https://hubblesite.org/contents/media/videos/2020/16/1277-Video
-
6:08:37
GamingWithHemp
14 hours agoPlaying Random games Episode #1
99.3K2 -
17:09
CartierFamily
1 day agoKevin O'Leary OBLITERATES CNN for ATTACKING Trump’s Booming Economy!
154K215 -
2:04:13
Roseanne Barr
3 days ago $228.56 earnedLet me introduce you to someone they call G-D | The Roseanne Barr Podcast #70
324K844 -
LIVE
Tommy's Podcast
20 hours agoE565: Delta Force Hawk Ops - Alpha Release
2,012 watching -
7:14:53
Delnorin Games
22 hours ago🔴 Live - CitizenCon 2954 Day 2 - Rumble Watch Party
144K -
1:06:57
The Breanna Morello Show
1 day ago $17.09 earnedLIVE STREAM: Going LIVE Sunday at 10am ET
122K42 -
51:47
Criminal Content
1 day agoPREDATOR (1987) Movie Reaction w/ Coby FIRST TIME WATCHING
118K32 -
13:52
Misha Petrov
1 day agoSmile 2 Review + Movie Breakdown
96K46 -
49:24
hickok45
21 hours agoSunday Shoot-a-Round # 251
95.4K63 -
11:04
Bearing
17 hours agoMan FAKED Being FAKE Woman - They/Them Community OUTRAGED!
89K72