Flashforge Dreamer (NX) Using a 0.2mm Nozzle and a Glass Print Bed - Part 1
This video series shows my experience with a 0.2mm nozzle and a glass print bed to print Star Wars credits for my Etsy store that have fine detailed lettering on both sides.
Part 1 covers:
1) Comparing the 0.2mm nozzle to the 0.4mm nozzle I typically use.
2) Installing the nozzle in the printer.
Part 2 covers:
1) Testing the nozzle with the standard FlashForge print surface.
2) Trying a glass surface.
Part 3a covers:
1) What I learned after a month of printing on glass with a 0.2mm nozzle - Part A
Part 3b covers:
1) What I learned after a month of printing on glass with a 0.2mm nozzle - Part B
Here's a link to the double-sided Star Wars credits I printed with this setup:
https://www.etsy.com/listing/1157516314/star-wars-the-book-of-boba-fett-new
Here's a link to the 0.2mm nozzle on Amazon:
https://smile.amazon.com/dp/B01LOYIGYM
Here's a link to the needle kit:
https://smile.amazon.com/dp/B07KC6VTDF
Later I found a set of 0.2mm needles by themselves (might be out of stock):
https://smile.amazon.com/dp/B06X15JCDS
Here's a link to the glass print bed I used:
https://smile.amazon.com/dp/B00WW58DXW
Here's a link to the binder clip set I bought since I wasn't sure exactly which size I needed:
https://smile.amazon.com/dp/B07DXSBT5J
These are the spatulas I used to help remove the pieces from the print bed:
https://smile.amazon.com/gp/product/B075SLTY8B/
These are the tweezers I used to help remove dripping filament from the print head:
https://smile.amazon.com/gp/product/B0845SKD7Z/
The wire brushes I use are no longer sold on amazon, but here's something similar:
https://smile.amazon.com/ABN-Inch-Detail-Brush-3-Piece/dp/B0195PCMF6/
Flashforge Dreamer NX on Amazon:
https://smile.amazon.com/gp/product/B07DPBRCYZ/
-------------------
Link to my Etsy Store:
https://www.etsy.com/shop/BetaCygniDesigns
---------------------
End Screen Video Acknowledgement: Cosmic Reef Video produced by NASA and the Space Telescope Science Institute (STScI).
https://hubblesite.org/contents/media/videos/2020/16/1277-Video
-
20:40
The Nima Yamini Show
8 hours agoAlpha King Nima Exposes Anti-Masculinity Agenda
11.6K22 -
7:02
TENET Media
11 hours agoNYC Hotels TAKEN OVER By Migrants | Lauren Southern
23.1K58 -
47:35
Alexis Wilkins
12 hours agoBetween the Headlines with Alexis Wilkins: NYPD Officers, Mexicos Leader, Fauci Hearing, DDay Salute
29.1K22 -
1:24:49
Glenn Greenwald
10 hours agoBriahna Joy Gray on her Firing from The Hill and Free Speech Double Standards; Leighton Woodhouse on his Reporting About Dr. Fauci’s Dog Experiments | SYSTEM UPDATE #279
89.6K254 -
2:27:28
Roseanne Barr
9 hours agoThe Roseanne & Jamie Kennedy Experiment | The Roseanne Barr Podcast #51
90.4K66 -
1:26:03
TruthStream with Joe and Scott
1 day agoDave "Guru" Graham and Natalie Cutler Welsh representing Australia and New Zealand! TruthStream #267 links below! Dave premiers his beautiful song to his daughter "Heaven Had Some Wings"
43.6K14 -
32:18
ROSE UNPLUGGED
7 hours ago“Turks and Caicos is the North Korea of Caribbean Islands”
37.8K11 -
18:15
RealitySurvival
21 hours agoDIY First Aid & Trauma Kit For The Home
32.2K3 -
3:35:42
FRENCHY4185
10 hours agoROAD TO 200 FOLLOWERS !!! XDEFIANT FT. THE BOYS !!!
61.6K6 -
1:56:06
2 MIKES LIVE
12 hours ago2 MIKES LIVE #75 OPEN MIKE FRIDAY!
58.5K4