Sharp VAWT Wing Construction - Part 1
1 year ago
30
The wing construction for a larger Sharp VAWT than in a previous video. The goal is a NACA0018 airfoil with a 200 mm chord that is 1.0 m long. I cut two smaller lengths because it was more manageable and then epoxy the smaller lengths together. Note, there were some fumes; this should be done in a well ventilated area. Later, I plan to cut them to length and cover them in fiberglass for strength and to meet a mass target of 200 to 250 grams.
Loading 4 comments...
-
14:01
VAWT035
2 years agoVAWT 035 - New Wing Construction
113 -
14:46
Sharp VAWT
1 year agoSharp VAWT Wing Construction - Part 2
14 -
6:00
tom43004
3 years agoNXT Sport Wing Construction #9c - Bag the Wing Part 3
291 -
2:18
clayisland
1 year agoBuild a Beginner Wood Foil Wing for under $20
40 -
12:38
Flying machines explained
2 years agoDesign & Build of a Flying Wing (With Balsa Wood) + Project Files
18 -
7:27
James Biggar
8 years agoBuild A DIY Axial Flux Wind Turbine Part 5a: Hand Carving The Master Blade
2 -
2:18
SubarumanFL
3 years agoComposite wing tip build
10 -
33:34
Flightcomp
3 years agoGCM F5K Build Part 2, Wing
3 -
32:37
Flying machines explained
2 years agoDesigning a Wing Structure for your UAV or RC Aircraft | Wing Helper
18 -
47:08
Roughcut1
2 years agoHollow & Round Plane Series, Part 3 - Fitting The Wedge & Blade, Shaping The Round
2