Name: DIY Corrugated Raised Garden Bed | How To Build Garden Bed
Uploaded: 2022-06-02T20:30:04+00:00
Duration: 12 min 56 s
Description: Hello YouTube world! This week’s video is how to build corrugated metal raised garden beds! This is not my usual furniture flip video, but join me in this journey to transform my backyard into a beaut

1 year ago

Hello YouTube world! This week’s video is how to build corrugated metal raised garden beds! This is not my usual furniture flip video, but join me in this journey to transform my backyard into a beautiful garden with raised beds and lattice walls.
I watched @HowToHomeDIY video first and took his idea and added to it. Make sure to check out his video for more details on how to build the garden box part! https://www.youtube.com/watch?v=zYzLOE-E-xw
New videos released every 1-2 weeks! With each video learn how to update and give second life to old, outdated, dusty, worn pieces of furniture. If you haven’t already head on over to my channel and make sure to subscribe. https://www.youtube.com/channel/UCr9i3sH3axD-d3VqT4i8mEA?sub_confirmation=1
Garden Box Measurements:
Here are the measurement cuts/plans I made for one box. In the video I made 4 boxes so I repeated the cuts 3 more times.
4x4 cuts: I did not cut the 4x4 corner posts for the outside so there were tall enough to add lattice panels to. The inside 4x4 post was cut to be 30” tall
2x4 cuts: For the long rectangle side the top and bottom pieces were cut 7ft long, there are two long sides to each rectangle box, so I made that cut 4 times for one garden box. The long sides of the garden boxes also had two pieces to help brace it through the middle and those were cut 19.75” and I made that cut 4 times for one garden box. The left and right of the long sides and short sides of the garden boxes were cut at 26.5” and I did that cut 8 times for one box. The top and bottom pieces of the short side of the garden box were cut 30” long, there are two short sides to each garden box, so I made that cut 4 times for one garden box.
For that lattice frame on the outside of the box I cut one 2x4 91” and one piece 37”. The long sides also had a middle piece added for support and I cut that one piece 46”
Lattice: For the long side I left the 4ftx8ft lattice panel as is. For the short side I left the 4ft side as is and made one cut 43”
Corrugated Metal cuts: For the long side the metal was cut at 90”, there are two long sides to each box for I made that cut twice. For the short sides the metal was cut 36” and I made that cut twice.
Here is the quantity I bought of each item to build all 4 boxes:
8ft Corrugated Metal Sheets (14)
4x4x8 (11)
2x4x8 (43)
4x8 Lattice Panels (5)
12X12 Pavestones (8)
Bags of Black mulch (11)
2 Boxes of Roofing Screws
3 Boxes of Kreg Screws
Product List: ***Disclaimer: Some of these links are affiliate links in which I am paid a small commission. It costs you nothing extra to use these links. By using the provided links you are helping support my channel, which I am extremely grateful for. All products I use are purchased with my own money and are my own opinion. Thank you so much!****