Custom Stage 2 Clutch Build For 800hp | Centerforce 2 Clutch For Turbo LS |

Today I am joined by Trent from Centerforce and we are at the Centerforce headquarters in Arizona. I made the trip from california so that Centerforce could build me a custom version of their Centerforce 2 Clutch Kit. The build consists of taking apart my stock clutch and figuring out what could be saved. Only the flywheel could be reused while the rest could only be used to take measurements for the new clutch. Originally the plan was to take the 10.5 inch clutch disk and install an 11 inch disk which would in itself increase the holding power by a lot. The engineers over at Centerforce found a way to fit a 12 inch clutch disk on the same flywheel which would further increase the holding power of the stage 2 clutch. The clutch was then upgraded again when they replaced the full face organic material and instead installed their segmented dual friction clutch disk. Top that off with their patented center weights and we now have a clutch is capable of supporting nearly 800hp. Whether or not the transmission can hold that power is unlikely but we will sure try to get there. This kit is upgrading my toyota r150 clutch disk and pressure plate that I have been using for the past 2 years.

#centerforce #stage2 #turbols

Check out all of their options here!
https://www.centerforce.com/