Heating and Bending PVC Conduit - BENDING 90s, OFFSETS, and BOX OFFSETS
Someone recently asked me if there’s a way to bend PVC conduit or if someone makes a bender or a tool to get a proper bend. In this episode we’re going to cover how I do it. There are specialized tools that some electricians use to do this, such as a sock, a spring, and a heated pad/blanket. I don't do any of that, but it's just because I don't have any of those tools. Any way you get it done, is a good way to do it.
👾🤖PRACTICE EXAMS🤖👾
https://www.electricianu.com/practice-exams
😎👕MERCH👕😎
https://www.electricianu.com/merchandise
📲👥SOCIALS👥📲
Instagram - https://www.instagram.com/electrician_u
Discord - https://discord.gg/7ykYfbh
Facebook Page - https://www.facebook.com/theelectricianu
Facebook Group - https://bit.ly/2tz7eQh
TikTok - https://www.tiktok.com/@electricianu
When working with PVC conduit electricians do one of two things when bends are involved. Either:
1) we will buy “manufactured bends” like pre-bent “90’s, 45’s, and 30’s”
2) we will use a heat gun to manually bend the conduit to fit the application.
Manufactured bends are often sold in the same aisle as the PVC conduit itself, and come in several angles. However, sometimes the job requires a slightly trickier bend to be made so we need to do it by hand. Often times pre-manufactured bends are too large, or create too small of an offset so it’s time to break out the heat gun!
To bend PVC you need to have either a high-powered blow dryer or an actual “heat gun” at your disposal. These can be bought online or at your local Home Depot. The model I have (and prefer) is a Wagner Furno 750. It has a digital display and will heat up to 750watts. Not only can you hold it like a gun to heat the conduit, but you can set it upright on the ground and roll the pipe with both hands. Not many models out there have this functionality.
The second thing to have nearby when bending conduit is a bottle of water or a hose. When heating PVC conduit it becomes very maleable, but it does not stay in the position you bend it without waiting quite awhile - while holding it in the desired position. One way to speed the drying process up is by splashing cool water on the PVC to set it instantaneously. CONTINUE READING AT: https://www.electricianu.com/podcast/episode-24-how-to-heat-and-bend-pvc-conduit-the-right-way
#heatgun #bendingpvc, #bendingconduit #pipebending
--
IF YOU ENJOY THESE VIDEOS PLEASE SUBSCRIBE AND "LIKE" THEM ABOVE. ALSO CHECK OUT THE ELECTRICIAN U PODCAST ON ITUNES!!
-
0:50
Electrician U
5 months agoWhat Are Lumens?
11.4K4 -
LIVE
Jim Jordan
1 hour agoHearing on the Weaponization of the Federal Government
1,927 watching -
57:59
Graham Allen
3 hours ago🚨DOCS REVEALED🚨 Biden Admin Wants Trump DEAD OR ALIVE?!
16.6K108 -
45:09
Rethinking the Dollar
1 hour agoExplosive Growth: Shanghai's Yuan Silver Futures Break Records at 8,733 Yuan/kg!
5331 -
2:20:54
Matt Kohrs
10 hours agoMarkets Rip To New Heights, NVDA Earnings Preview & Live Trading || The MK Show
11.1K6 -
LIVE
LumpyPotatoX2
3 hours agoHappy Lump Day! - #RumbleTakeover
869 watching -
1:43:38
Game On!
12 hours agoThe Celtics Will Never Win an NBA Title| Sports Morning Espresso Shot
18.3K1 -
1:57:04
Kim Iversen
15 hours agoWEF’s Klaus Schwab Is Retiring. Who's Next? GOP Bill Gives VA Benefits To IDF Soldiers | Anti-Genocide 2024 Candidate Jill Stein
83.1K270 -
22:46
Producer Michael
22 hours agoTHESE ARE THE CHEAPEST ROLEX AND CARTIER WATCHES YOU CAN BUY RIGHT NOW!
24.1K3 -
17:34
Yarnhub
23 hours agoMidway From The Japanese Perspective
21.2K7