Flashforge Dreamer (NX) - Replacing Printhead & Nozzle plus switching to a Silicone Sock - Part 4
I was having problems with extrusion again so took the nozzle out of the printhead to see what was going on with the heat-break tube.
About a month ago, I tried to replace the heat-break tube while the printhead was still hot and ended up stripping the threads on the nozzle & printhead. Big mistake!
The printhead is made of aluminum and the nozzle is nickel-plated brass. Aluminum will get soft when it gets hot.
Anyway, I needed to replace the printhead and the nozzle, so I decided to go ahead and try using a silicone sock for the insulation of printhead instead of the thin fiberglass (I assume) tape that surrounds the stock printhead, held on with Kapton tape.
Part 1 covers diagnosing the problem and removing the nozzle from the old printhead.'
Part 2 covers disassembling the printhead including removing the insulation, thermocouple, and heat rod.
Part 3 covers reassembling the printhead using Boron-Nitride thermal paste for better heat connectivity
Part 4 finishes the reassembly of the printhead, installing the silicone sock, and testing the printer.
Link to replacement printhead:
https://flashforge-usa.com/collections/parts-accessories/products/extruder-aluminum-block
Link to Micro-Swiss nickel-plated brass 0.4mm nozzle:
https://smile.amazon.com/dp/B01BDL4NKM
Link to Authentic Capricorn PTFE Bowden Tubing (1 Meter) XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter on Amazon:
https://smile.amazon.com/gp/product/B07PS3NH82/
Link to Slice Engineering Boron Nitride Thermal Paste
https://www.matterhackers.com/store/l/boron-nitride-thermal-paste/sk/MRH0MS03
These are the spatulas I used to help remove the pieces from the print bed:
https://smile.amazon.com/gp/product/B075SLTY8B/
These are the tweezers I used to help remove dripping filament from the print head:
https://smile.amazon.com/gp/product/B0845SKD7Z/
The wire brushes I use are no longer sold on amazon, but here's something similar:
https://smile.amazon.com/ABN-Inch-Detail-Brush-3-Piece/dp/B0195PCMF6/
Flashforge Dreamer NX on Amazon:
https://smile.amazon.com/gp/product/B07DPBRCYZ/
-------------------
Link to my Etsy Store:
https://www.etsy.com/shop/BetaCygniDesigns
---------------------
End Screen Video Acknowledgement: Cosmic Reef Video produced by NASA and the Space Telescope Science Institute (STScI).
https://hubblesite.org/contents/media/videos/2020/16/1277-Video
-
1:14:28
Man in America
15 hours ago🔴 LIVE: Leaked CCP Speech Reveals Plan to KILL 100M Americans
36.3K84 -
LIVE
Right Side Broadcasting Network
1 day agoLIVE REPLAY: President Trump Holds a Rally at Trump National in Doral, Florida - 7/9/24
4,411 watching -
1:26:23
Kim Iversen
7 hours agoDo Viruses Even Exist? This Doctor Says He Can Prove That They Don't.
67.7K311 -
1:37:47
Glenn Greenwald
8 hours agoBiden Administration Blames Russia for Age Concerns; Crackdowns on Israel's Critics Escalate in U.S.; Ukraine War Appears Permanent Ahead of NATO Summit | SYSTEM UPDATE #294
83.8K167 -
1:27:00
Laura Loomer
8 hours agoEP57: LIVE COVERAGE: Trump Rally in Miami, FL
62.3K18 -
2:29:30
WeAreChange
8 hours agoBiden WON'T Handle NUCLEAR FOOTBALL If War Breaks Out After 8 PM??
85.3K29 -
57:56
The StoneZONE with Roger Stone
9 hours agoWill Biden Declare A National Emergency To Cancel The 2024 Election? Pete Santilli | The StoneZONE
53.9K15 -
1:04:17
The Osbournes
21 hours agoOzzy’s Ultimate Dream Band | Fan Questions Answered
74K15 -
4:16:47
Drew Hernandez
14 hours agoWATCH PARTY: TRUMP RALLY DORAL FL
77.3K22 -
23:18
Winston Marshall
6 days ago“We Have Been Betrayed!” What’s Really Going On with Farage’s Reform UK Party
71.4K22