Premium Only Content

Kitchen Butcher Block Installation - DIY Guide & Money Saving Tips
Step by step DIY guide on how to install a Kitchen Butcher Block Countertop with the cut out for a sink. Scroll down for descriptions of products used.
Leave us a comment to say Hi 💁 then watch our Butcher Block video on how to apply food safe Watco oil for a beautiful finish: https://youtu.be/OXk_oCj6N7c
_______ Video Chapters: ________
0:00 Intro & Removing Old Screws
0:22 Removing Old Countertop
0:57 Metal Plate Over Dishwasher or Not?
2:33 The Top of the Butcher Block
2:53 Tools for Cutting Sink and Faucet Holes
3:14 Trial Run For Fitting The Countertop
5:26 Applying Silicone to Underside of Butcher Block
7:08 Securing Undermount Sink with Brackets & Screws
8:22 Carrying Heavy Butcher Block with Attached Sink
9:42 Removing Front Clips/Brackets and Securing Butcher Block
10:10 Installing Faucet, Using Spacers & Final Thoughts
🛠🛠🛠
We used the following products & tools to complete this DIY project:
60 in. Butcher Block (Walnut) - https://amzn.to/3sfCzqq.
48 in. Butcher Block (Walnut) - https://amzn.to/3MYWbHr
Watco Butcher Block Oil & Finish - https://amzn.to/383eXyy
Cotton Rags & Tack Cloth (on hand) - https://amzn.to/3yhLJqf
Moen Over/Undermount Sink comes with template & clips (reused) - https://amzn.to/3kJO1q5
Cordless Ryobi Jig Saw (on hand)- https://amzn.to/3M4rdh3
Diablo Bi-Metal Jig Saw Blades (ultra-fine) - https://amzn.to/3MVeBbO
5/8 in. Drill Bit (on hand) - https://amzn.to/3wdZljQ
1 1/2 in. Hole Saw (on hand) - https://amzn.to/3yfwrCk
Painter Tape (on hand) - https://amzn.to/37imZmy
Mold Armor 100% Silicone - https://www.lowes.com/pd/Mold-Armor-10-fl-oz-Clear-Silicone-Caulk/5001941737
Caulk Gun (on hand)- https://amzn.to/3FhYt1q
1 1/2 in. Spax #10 Construction Screws - https://amzn.to/3yxO8gP
Butcher Block countertop installation is not for the faint of heart. 🤓
Wooden countertops are less expensive than stone, marble or quartz. But, the measurements have to be precise, you will need a few must-have tools and it is a pretty time consuming DIY project. Dry time between the four Watco applications is 6 hours minimum and 24 hours before first use.
Let us know if you have any questions!
Thank you so much for watching our #KitchenDIY #ButcherBlock video!
❤ Nick & Silke
-
LIVE
VINCE
1 hour agoLeft Exploits Dead Children To Attack Trump — Here’s Why They’re Disgracefully Wrong | Episode 79
32,411 watching -
LIVE
Dear America
1 hour agoElon Starts AMERICAN PARTY!! + FBI Says There Is NO Epstein Client List?!🤯😳🤯
12,764 watching -
LIVE
Badlands Media
5 hours agoBadlands Daily - July 7, 2025
1,629 watching -
LIVE
Wendy Bell Radio
5 hours agoUnimaginable Horror
10,241 watching -
LIVE
LFA TV
18 hours agoLFA TV ALL DAY STREAM - MONDAY 7/7/25
3,626 watching -
LIVE
Rethinking the Dollar
26 minutes agoMonday Morning Check-In: Let's Talk...
195 watching -
8:59
Bearing
2 hours agoJaguar’s 97% Sales Drop: CEO Raw Dong Lover COPES 💥 Get Woke, Go Broke 🤣
4237 -
13:15
Clownfish TV
2 hours agoGen Z Isn't Buying Video Games...
2841 -
3:58:28
The Bubba Army
5 days agoNO Epstein Client List - Bubba the Love Sponge® Show | 7/07/25
36.5K12 -
28:53
Tucker Carlson
2 hours agoTucker Carlson Interviews President of Iran Mosoud Pezeshkian
17.9K113