Ladder Logic Programming Basics - XIC & XIO Instructions in RSLogix 5000
Ladder Logic Programming Basics - XIC & XIO Instructions in RSLogix 5000
Visit: https://onlineplcsupport.com/ for more helpful knowledge.
The XIC, also known as Examine If Closed, instruction is one of the fundamental instructions used in ladder logic programming for Programmable Logic Controllers (PLCs). This instruction is always found on the left side of a ladder rung and will verify if the specified bit is in a logic Active state (Meaning a value of 1). If that’s the case, the instruction will evaluate to true and allow the rest of the rung to execute.
The XIO, also known as Examine If Open, instruction performs the function opposite to the XIC (Examine if Closed). It’s a fundamental instruction for working with Programmable Logic Controllers (PLCs). This instruction can be found on the left side of a ladder logic rung and will evaluate to true if the specified bit is set to a Not Active state (Meaning a value of 0). If that’s the case, the instruction will allow the rest of the rung to execute.
Relevant Search Terms:
ladder logic programming, ladder logic basics, ladder logic examples, ladder logic plc, ladder logic plc programming, ladder logic plc programing examples, ladder logic xic, xio instruction
0:00 XIC and XIO Intro
0:20 The hardware
1:20 What an XIC instruction does
2:15 How an XIC instruction works
2:50 XIC instruction recap
3:45 Example of a seal-in Circuit
5:00 Using XIC instructions
5:55 How an XIO instruction works
6:15 Pressing both buttons to show the XIC & XIO instructions in use
6:25 XIC instruction opposite to an XIO instruction
6:45 Quick recap
Thank you for watching the video.
Learn, Implement, Succeed
Visit:
https://www.allen-bradley-plc-training.com/
Other social media:
LinkedIn: https://www.linkedin.com/in/shane-welcher-sr/
Facebook: https://www.facebook.com/OnlinePLCSupport
#rslogix5000 #XIO #XIC
-
16:42
Shane Welcher
3 years agoWhat is a Boolean In Studio 5000 | XIC instruction & XIO instruction tutorial | Batching PLC Day-18
19 -
1:34
teamfreelance
1 year agoLearn PLC Ladder programming Lesson Two
1 -
6:01
Electrical Electronics Applications
1 year agoLogic Gates (NAND, NOR, XOR, XNOR Gates) Part 2/2
68 -
0:52
teamfreelance
1 year ago $0.01 earnedLearn PLC Ladder programming Lesson One
4 -
8:01
Electrical Electronics Applications
1 year ago $0.01 earnedLogic Gates (AND, OR, NOT Gates) Part 1/2
63 -
4:24
AHMEDKAZEKA97
2 years agoUART design in Verilog HDL with step-by-step instructions
14 -
20:58
C0-23 RSLogix/Studio5000 Logix Designer Basics Volume One
3 years agoC21 - Learn PAC RSLogix/Studio5000 - RTO Instruction - PLC Professor
6 -
10:21
Born To Produce
2 years ago $0.01 earnedLogic Pro tutorial lesson 1
53 -
8:05
AccAutomation
2 years agoClick PLC Shift Register Instruction
26 -
12:24
Tech With Tim
3 years agoLearn C++ With Me #7 - Logical Operators (And, Or and Not)
23