Disconnect Box Wiring on the Klimaire 24,000 BTU DIY Heat Pump Mini Split

I had a request in the comments on the Klimaire DIY Mini Split install video to get a closer look at the Disconnect Box, so here we are.
The cover and protective plate were removed before I started filming.
The 24000 BTU unit pulls 14 amps, so it is wired up to a 20 Amp Double Pole Breaker using 12 AWG Outdoor Rated Romex. (UV/UB).
Wiring is basic. You have L1, L2 and Ground in the unit, plus a quick connect for the control wires.
Put the ground on ground, and one of your hot wires on each of the L1 and L2 connections, doesn't matter which one gets the black or white wires.
Disconnect box wiring is also simple, put the two blacks on one side, the two whites on the other, and the ground wires to the ground lug.
I've had this system up and running for almost a year now with no issues, breaker has never tripped, and the electric bills are a lot lower than before.

Hope this helps, and please consider hitting that Subscribe button.

Product Links:
Disconnect Box:
https://amzn.to/3X7S95d
About $25

Klimaire 24000 BTU DIY Mini Split shown in the video:
https://amzn.to/3hHmkA1
About $1600
This one has pre-charged line sets, no vacuum needed.

Found this one while pulling the link for the Disconnect box...
Klimaire 24000 BTU Mini Split
Will require vacuum pump for install, and the line sets are a bit shorter.
https://amzn.to/3ObakTu
About $1175

If you found this video helpful, and buy stuff on Amazon anyways, then I'd appreciate you using any of the links above for your next purchase.
It will cost you nothing extra, and as an Amazon Associate, I'll earn a few cents as a commission on your purchase, even if you buy something else.