Awesome Restoration of a Huge Hunting Knife. The Most Incredible Handle!

I got this antique knife very cheaply. Apparently the seller saw only rusty scrap metal in it)))
The metal has been preserved in very good condition, only the thin metal on the shank of the handle has been damaged.

Recovery process:
The first thing I did was to remove all the rust using the electrolysis process. Then I drilled out the old rivets that held the blade's tang. Using the old shank as a template, I fabricated two new parts, then riveted them using steel rod.
For the handle, I used two different designs of stabilized wood.
To secure the handle to the shank I used epoxy glue and also used a brass pin.

After the glue hardened, I shaped the handle on a belt grinder and then finished it by hand using rasps and files.

https://youtu.be/2_czep4fCDo

To sand the handle I used 250 to 2000 grit sandpaper, and at the very end I used carnauba wax for polishing.

I really liked the result, I hope you rate it using the "Like" button.

Thank you all for watching and see you next week!!!

Take care of yourself!
Best wishes Max!

#knife
#restoration
#awesomerestoration