EP 002: Simple DIY Boot rack

Organize your entryway or garage with this simple to make boot/shoe rack.

To make a 32" wide, 12" tall, 16" deep boot rack you will need:

QTY 4, 8 foot 1x4 boards
1"x4" boards cut list:
5 cut to 32"
8 cut to 11.75"
5 cut to 16"

Wood screws - used 1.5" #8 deck screws
- Could use brad nailer, kreg jig, etc

Easy to adjust this to meet your needs. The 32" is the width and is cut exactly to the width you desire. The 16" is the depth, and also can be cut exactly to the length required. These are the support boards. Inset the outer 2 support boards by the thickness of the 1"x4" board (which is 0.75"). Cut the desired final top height of rack the thickness of 1"x4" board shorter (0.75"). Example - desired top height of 12", cut the legs to 11.25".