Premium Only Content
Can I Fix My Broken Cruis'n Blast Monitor?
https://arcadeheroes.com - The backlight in one of my Cruis'n Blast machines went out recently and in contacting the distributor I bought the game from, they determined it was "unfixable." Fortunately, I sought a second opinion, where arcade operator TJ Beyer had recently repaired onw of his dead monitors, pointing me to this link to buy replacement lights and suction cups to be able to remove the LCD:
https://www.shopjimmy.com/tb4307d-led-backlight-strips-10-mt43w-267c3-wei-ya-makvision/
The monitor in question is a Wei-Ya Makvision 43", which originally came with the game. I've never done this before so it was quite an experience - it took about 6 hours but I condensed this into 30 min. Timecodes:
0:10 - Intro to the problem
3:40 - Removing bolts to pull the monitor out
4:16 - Removing the monitor
4:56 - Monitor on the air hockey table; Removing L brackets
5:28 - Flipping over & removing the glass
5:41 - Removing the foam around the edges
6:11 - Removing panels from the back
6:56 - Trying to keep all the screws from going missing
8:06 - Showing some internal connectors that have to be disconnected
9:25 - Removing the monitors power supply
9:47 - Removing screws to pull off the main back panel
10:38 - Mentioning some small clips which need to be pushed in; Removing internal brackets
11:09 - Removing the screws which hold the topside of the LCD panel in place
12:32 - First attempt on LCD panel removal, but noticed circuit boards that needed to be removed first
13:49 - LCD panel removed, now to remove plastic edge bracket & diffusion layers
14:56 - Removing the internal white reflection panel
15:37 - Disconnecting the LED strips
16:54 - Removing the bad LED strips
17:26 - Unpacking the new LED strips
18:00 - Installing new strips w/ double sided tape
18:26 - Now to put it all back together...
19:54 - Putting the LCD panel back into place
21:36 - Reattaching brackets, panels
25:15 - Reapplying the foam
26:21 - Putting the monitor back onto the glass, aligning
27:24 - Reinstalling main L brackets
28:00 - DOES IT WORK OR DID I BREAK IT??
Except for one song, all music in the video is from Cruis'n World.
Interact with the Arcade Heroes community on Guilded: https://www.guilded.gg/i/E0L6LGME
Or interact on Discord: https://discord.gg/jnKJTN23
-
2:32
Arcade Heroes - The Saviors of Coin-op
4 months agoMaking A Quick Visit To The Bay Tek Entertainment Booth [Amusement Expo 2024]
28 -
LIVE
The Quartering
47 minutes agoTrump Tariffs Immediately Work, Thanksgiving Cost Insanity, Hollywood Actor In Psych Ward From Trump
3,274 watching -
LIVE
vivafrei
2 hours agoInterview with Rumble CEO Chris Pavlovski - Rumble & Bitcoin? Shocking Stats From Florida & MORE!
3,908 watching -
59:02
Russell Brand
2 hours agoIs Free Speech Under Threat? Australia’s U16 Social Media Ban, & Maddow vs Jay Bhattacharya – SF501
76K52 -
LIVE
The Charlie Kirk Show
1 hour agoTrump's Tariff Brilliance + Crushing Lawfare Forever | Sen. Moreno, Habba, O'Keefe | 11.26.24
12,744 watching -
LIVE
TheAlecLaceShow
1 hour agoTrump Threatens Tariffs on Mexico & Canada | Jack Smith Drops Charges | WW3 | The Alec Lace Show
413 watching -
6:57
Rethinking the Dollar
16 hours agoCommodities Boom Incoming: Why Gold and Silver Are Leading the Charge
5652 -
LIVE
Sgtfinesse
2 hours agoSarge's 1st Stream on Rumble
386 watching -
58:23
The Dan Bongino Show
4 hours agoDemocrats Enter Full Panic Mode (Ep. 2378) - 11/26/2024
583K1.25K -
58:04
The Rubin Report
2 hours agoCNN Host Gets Visibly Angry as Her Trap for Conservative Backfires in Her Face
47.9K48