BTT RASPBERRY PAD 5 - With Octoprint and Octodash

2 years ago
55

#PAD5 #BIGTREETECH #PCBWAY
Purchase From - https://shareasale.com/r.cfm?b=1890927&u=3212856&m=118144&urllink=&afftrack=
PCBWay: https://www.pcbway.com/
This is the BigtreeTech #RaspberryPi Pad 5. This is an IO Board for the CM4., that also has a 5in 800x480 IPS pixel display. I decided that I wanted to run #Octoprint with #Octodash on it. Is it simple to configure? Well I broke it down to 10 steps. Let me know what you would use this for? Mini computer, game system, robot, special project?

Follow along instructions -
Optional - Print case from BTT
https://github.com/bigtreetech/Raspberry-Pad/tree/master/Pad5/3D
Step 1 - BigtreeTech Github - Download PDF
https://github.com/bigtreetech/Raspberry-Pad/tree/master/Pad5
Step 2 -
Flip the switches to USB Mode - Then connect to USB-C to your computer
Step 3 -Download, install, and run RPI Boot:
http://github.com/raspberrypi/usbboot/raw/master/win32/rpiboot_setup.exe
Step 4 -Download, Install, and run the Raspberry Pi Imager
https://www.raspberrypi.com/software/
Step 5 -
Power down, Remove USB-C, Flip Switches back, Power up, wait for it to load
Step 6 - Download Putty
https://www.putty.org/
Step 7 - Enable USB Ports
sudo sed -i '$a\dtoverlay=dwc2,dr_mode=host' /boot/config.txt
Step 8 - Install BTT Display drivers
sudo wget https://datasheets.raspberrypi.com/cmio/dt-blob-disp1-cam1.bin -O /boot/dt-blob.bin
Step 9 - Install OctoDash
https://github.com/UnchartedBull/OctoDash
Copy link from site
Step 10 - Configure Octoprint

#Polymaker3d Filament -
https://polymaker.com
USB 5v Eliminator -
https://www.amazon.com/dp/B094FYL9QT/ref=cm_sw_r_cp_api_i_BV07PWGC0GBT98QR8YQC?_encoding=UTF8&psc=1
USB Magnetic Cable,2Pack -
https://www.amazon.com/dp/B08HCM8NNT/ref=cm_sw_em_r_mt_dp_3BZN350SMD08PJJWQGYT?_encoding=UTF8&psc=1
Xiwai 1 Set Up & Down Angled USB 2.0 -
https://www.amazon.com/gp/product/B08NXGL9ZJ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Raspberry Pi Mini Camera Video Module 5 Megapixels -
https://www.amazon.com/gp/product/B07L82XBNM/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1

Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!

https://www.facebook.com/tripodsgarage/
https://twitter.com/tripodsgarage
https://www.instagram.com/tripodsgarage/

Thanks for watching - Please Like and Subscribe!

Tags
CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, creality silent board, silent board, BIRGTREETECH, SKR CR6V1.0, #Artillery Hornet, Artillery Genius, #Kywoo Tycoon Slim, #Ender5Plus #CR6SE, #FLSUN #SR #Superracer, Bondtech #FOKOOS #ODIN-5 #3DPrinter #3DPrinting #longerlk5pro #longer3dprinter #LK5PRO #BTT #raspberrypicm4 #raspberrypi #cm4 CM4 #timelapse timelapse

Loading comments...