No Talk Demo Gojira Drive by KHDK Electronics Stiletto Deuce Stage 2 Red Channel

Gojira style riffs on my Ormsby Metal V 7 string Tuned to B using the Red Channel of my Stiletto Deuce Stage 2

Signal chain as follows
Ormsby Metal V 7 string
ISP Decimator
Gojira Drive 2022 KHDK
Stiletto Deuce Stage 2
Two Notes Captor X
Vintage 30 - 4x12 (Closed) SM57 from Celestin

**************************************************************************

CONTROLS
Bass: Your pre-bass control. In the center, the effect is neutral. Turned clockwise, the bottom end content is boosted, counterclockwise it gets cut.

Treble: Controls the amount of high frequencies. The center point is neutral, clockwise boost the highs, counterclockwise cuts the highs.

Drive: Controls the amount of pre-gain, which affects the amount of compression and saturation.

Volume: Controls the amount of output volume. Warning: The output gets loud on the max setting. Seriously. Loud. I mean this is fucking Gojira.

To use the Drive as a booster for your overdriven amp, set the Volume control higher and Drive lower. This will push your amp into an overdrive monster and EQ section of the pedal becomes a powerfuĺ pre-EQ tone sculpting tool.

With a dirty amp, set Drive higher to get your desired amount of harmonic overdrive and use Volume for setting the output power of the pedal.

POWER
Always Connect a 9V DC center negative power supply. The pedal can be powered by an external DC power supply. Use a stabilized DC with 2.1mm barrel connector and negative center. Use 9, maximum 10V power source. Why? The voltage is internally boosted to 30 volts (!) for maximum headroom, amp-like dynamics and a huge volume boost.