Name: V28-Dillon XL750, Priming System Conversion
Uploaded: 2019-10-07T16:50:48+00:00
Duration: 10 min 30 s
Description: V28-Dillon XL750, Priming System Conversion ***IMPORTANT*** If your bottom cam wire (op rod bracket) wheel is making contact with the primer bar upon return, it is not recommended to adjust the op rod

6 years ago

131

V28-Dillon XL750, Priming System Conversion

***IMPORTANT*** If your bottom cam wire (op rod bracket) wheel is making contact with the primer bar upon return, it is not recommended to adjust the op rod bracket. The height adjustment for the op rod bracket needs to be 5-5/8" high and aligned with the system. This is explained on page 44 of your Dillon XL750 manual. The issue is... the cam wire is slightly bent. The cam wires are heat bent so a slight adjustment can be made, but if bent too far they may spring back over time and eventually fail. Watch the next video in this series and I will show how I bent slightly bent my wire back. I hope it helps. Highboy

For the actual caliber conversion, I will make each step its own video. That way the viewer can easily reference the video they need as opposed to watching a complete lengthy video. God bless and thanks for watching. Highboy

Brinks Home Security: brinkshome.com
Dillon Precision: https://www.dillonprecision.com/
Mighty Armory: https://www.mightyarmory.com/
Inline Fabrication: https://inlinefabrication.com/
Palmetto State Armory: http://bit.ly/2Mi2OsT
Accura Bullets: https://accuraoutdoors.com/
Missouri Bullet Company: https://missouribullet.com/
Bob’s Bullets: https://223bulkbullets.com/
Starline Brass: https://www.starlinebrass.com/
Ammo Brass: https://www.ammobrass.com/
Ransom International: https://ransomrest.com/